Abstract:Metal oxide modified nickel catalysts are highly desirable for the conversion of biomass-derived compounds to biofuels and valuable chemicals because of their low-cost and unique synergistic effects in catalytic reaction. Herein, a series of metal oxide modified nickel catalysts were scrutinized in the hydrodeoxygenation of steatic acid to diesel-range alkanes without any carbon loss as a model reaction. The results showed that MoOx modified Ni/SiO2 catalyst was the most active and selective for the hydrodeoxygenation of stearic acid under mild reaction conditions (260 °C and 3.0 MPa H2 partial pressure). The catalyst with an Ni/Mo molar ratio of 1, and that was reduced at an optimized temperature (500 °C), exhibited the best performance; this catalyst achieved a high selectivity (>95%) to diesel-range alkanes at 100% stearic acid conversion. A high selectivity (>60%) to C18 alkane and a less than 30% selectivity to C17 alkane were observed at 260 °C and 3.0 MPa H2 partial pressure. By selecting an appropriate support, the selectivity to C18 alkane can reach 95% at 100% stearic acid conversion over Ni–Mo/H-ZSM-5 catalysts. In contrast to Ni/SiO2, Ni–Mo/SiO2 was more efficient for CO hydrogenation and less active for C–C bond cleavage, which afforded a higher selectivity to long-chain hydrocarbons without any carbon loss. Detailed characterization, control experiments, and kinetic studies indicate that the high activity and selectivity to the C18 alkane arises from a synergy between Ni and MoOx. The Ni sites at the interface between the Ni metal and MoOx species play a role in the generation of hydride (Hδ−) species from H2 dissociation, and MoOx plays a role in promotion of fatty acids adsorption through adsorbing carboxylic groups at the oxygen vacancy of MoOx. The deep understanding of such synergic catalysis will provide significant clues for the rational design of bimetallic catalysts towards the production of diesel-range alkanes without any carbon loss from the hydrodeoxygenation of fatty acids/esters.

Nickel molybdenum bimetallic nitrides as efficient catalysts for hydrodeoxygenation of methyl palmitate

Bimetallic Ni and Mo Nitride as an Efficient Catalyst for Hydrodeoxygenation of Palmitic Acid

The promotion effects of MoOx species in the highly effective NiMo/MgAl2O4 catalysts for the hydrodeoxygenation of methyl palmitate

Co3Mo3N as an alternative for noble-metal catalysts in hydrodeoxygenation of methyl palmitate to diesel range hydrocarbons

Role of ZrO2 crystal on the hydrodeoxygenation of methyl palmitate over NiMo/ZrO2 catalyst

Carbon-coated Ni-Co alloy catalysts: preparation and performance for in-situ aqueous phase hydrodeoxygenation of methyl palmitate to hydrocarbons using methanol as the hydrogen donor

Bimetallic NiMo Using MOF-Derived Carbon-Supported Catalysts for the Reaction of Lauric Acid to Alkane

Catalytic Hydropyrolysis of Lignin Using NiMo-doped Catalysts: Catalyst Evaluation and Mechanism Analysis

Hydrodeoxygenation of Methyl Palmitate over Supported Ni Catalysts for Diesel-like Fuel Production

Highly stable Mo-based bimetallic catalysts for selective deoxygenation of oleic acid to fuel-like hydrocarbons

Efficiency conversion of jatropha oil into high-quality biofuel over the innovative Ni-Mo2N based catalyst

Enhancement of fatty acids hydrodeoxygenation selectivity to diesel-range alkanes over the supported Ni-MoOx catalyst and elucidation of the active phase

Electronic Tuning of Ni by Mo Species for Highly Efficient Hydroisomerization of N-Alkanes Comparable to Pt-Based Catalysts

In-situ aqueous phase hydrodeoxygenation of methyl palmitate on Ni-Co alloy embedded in mesoporous carbon hollow spheres catalysts

Efficient hydrothermal deoxygenation of methyl palmitate to diesel-like hydrocarbons on carbon encapsulated Ni−Sn intermetallic compounds with methanol as hydrogen donor

Molybdenum Modified Nickel Phyllosilicates As a High Performance Bifunctional Catalyst for Deoxygenation of Methyl Palmitate to Alkanes under Mild Conditions

In Situ Aqueous Phase Hydrodeoxygenation of Methyl Palmitate on Ni-Co Alloy Particles Embedded in Mesoporous Carbon Hollow Sphere Catalysts

Polymethyl Methacrylate assisted mesoporous TiO2 supported Ni–Co alloy catalysts for the in situ hydrodeoxygenation of methyl palmitate

Effective Hydrodeoxygenation of Palmitic Acid to Diesel-Like Hydrocarbons over MoO 2 /cnts Catalyst

Ni-based metal-organic frameworks prepared with terephthalic acid hydroxylation converted methyl palmitate into jet-fuel range hydrocarbons in CO<sub>2</sub> atmosphere

Rational design of Ni–MoO3– catalyst towards efficient hydrodeoxygenation of lignin–derived bio–oil into naphthenes