Abstract:This study investigates the mechanisms behind the great mechanical properties observed at room temperature for a dual-phase Ti-6Al-2Sn-4Zr-2Mo-Si titanium alloy with equiaxed (α + β) microstructures. More precisely, analyzing the material deformation modes and the possible effects of β fraction and grain size was done to better understand such micromechanisms. With this idea in mind, uniaxial tensile deformation tests were performed at room temperature, and the resulting mechanical behaviors were analyzed. It was observed that increasing β fraction would enhance the overall ductility and work hardening while conversely decreasing the material resistance. Additionally, the material strengthening due to grain size effect, quantified by the Hall-Petch parameter, was also found to be dependent on β fraction. Slip trace analysis was conducted to understand the effects of grain size and β fraction on the activation of the basal , prismatic , and pyramidal slip systems and their critical resolved shear stress (CRSS) ratios were established. The qualitative study of CRSS ratios revealed that at smaller grain sizes, the basal slip systems were dominant (e.g. basal/prismatic CRSS ratio of 0.86 for d=2.98 μm) whereas the prismatic slip systems were prevalent and more easily activated for coarser grains (e.g. basal/prismatic CRSS ratio of 1.19 for d=4.21 μm). Such CRSS ratios were then used to identify the material parameters of a self-consistent multiscale model employed to reproduce the tensile behaviors . For a more quantitative analysis, the CRSS values were evaluated and correlated to grain sizes with Hall-Petch relations. Clear correlations regarding grain size and β fraction were found for the CRSS of prismatic and pyramidal systems. However, special attention was given to the ambiguous results regarding basal slip systems because of the potential manifestation of the compatibility stresses and grain boundary sliding mechanisms due to the higher density of grain boundaries at small grain sizes.

Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity

Crystal Plasticity Finite Element Simulation of Grain Evolution Behavior in Aluminum Alloy Rolling

An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability

Crystal Plasticity Finite Element Simulation Study on Thread Rolling Pure Aluminum

Microstructural Evolution and Mechanical Properties of Pure Aluminum upon Multi-Pass Caliber Rolling

Anisotropic Mechanical Behavior and Microstructural Characteristics of AA2099-T83 Alloy Sheet: Experiment and Simulation

Multiscale Mechanical Behavior and Microstructure Evolution of Extruded Magnesium Alloy Sheets: Experimental and Crystal Plasticity Analysis

Process metallurgy analyses of sheet rolling by multi-scale finite element method based on thermal elastic crystal plasticity theory

Molecular Dynamics Simulations of the Tensile Mechanical Responses of Selective Laser-Melted Aluminum with Different Crystalline Forms

Microstructure characterization and crystal plastic finite element simulation of additive manufacturing 316 L stainless steel

A Damage-Effect-involved Phenomenological Crystal Plasticity Model and Computational Methods for Mechanical Responses of FeCrAl Alloys

Characterization and constitutive analysis-based crystal plasticity of warm flow and fracture behaviours of 2060 Al-Cu-Li alloy

Characterizing microscale deformation mechanisms and macroscopic tensile properties of a high strength magnesium rare-earth alloy: A combined experimental and crystal plasticity approach

Deformation-Induced Surface Roughening of an Aluminum–Magnesium Alloy: Experimental Characterization and Crystal Plasticity Modeling

Crystal Plasticity Finite Element Analyses on the Formability of AA6061 Aluminum Alloy with Different Ageing Treatments

Effects of grain size and β fraction on the deformation modes of a Ti-6Al-2Sn-4Zr-2Mo-Si alloy with equiaxed (α + β) microstructures: Slip trace analysis and multiscale simulation of polycrystal plasticity

Anisotropic Tensile Behavior and Related Yield Point Phenomena in Annealed Ultrafine-Grained Pure Aluminum

Molecular Dynamics Simulations of Pre-Crack Effects on Deformation and Failure Mechanisms for Pure Aluminum

A multiscale analysis of fixed-end simple shear using molecular dynamics, crystal plasticity, and a macroscopic internal state variable theory

Mesoscale Simulation Research on the Homogenized Elasto-Plastic Behavior of FeCrAl Alloys

Crystal Plasticity-Based Assessment of Constitutive Laws for Microstructure and Rolling Texture Capture in Ferritic Stainless Steel During Cold Rolling