Abstract:Abstract Today, rare-earth elements are mainly introduced in alloys in the form of misch metal, which is a natural mixture of rare-earth elements (with atomic numbers 57–71). This mixture contains about 50 wt % cerium. The primary components of the mixture are generally cerium, lanthanum, and niobium. The specific composition depends on the particular field from which they were drawn. The variable composition of this mixture may significantly impair its effectiveness in alloying. The ratio of the individual elements in the mixture cannot be determined experimentally for each grade of steel, because of the prohibitive expense of such separation. However, thermodynamic modeling permits determination of the optimal concentration of each rare-earth element and the composition of the misch metal. In the present work, thermodynamic modeling is applied to the interaction of magnesium, aluminum, and lanthanum with oxygen in liquid iron. The thermodynamic model of the reduction of steel by mixtures of such active metals is considered. On the basis of literature data regarding the phase diagrams of the MgO–Al 2 O 3 , MgO–La 2 O 3 , and La 2 O 3 –Al 2 O 3 systems, the coordinates of points of invariant equilibrium in the MgO–La 2 O 3 –Al 2 O 3 system are established. The MgO–La 2 O 3 –Al 2 O 3 phase diagram is plotted. That permits the identification of all possible equilibria in the reduction of steel by magnesium, aluminum, and lanthanum and also the determination of corresponding descriptive equations. The activity of the components in liquid oxide melts is determined by the theory of subregular ionic solutions, taking account of the influence of the oxide melt’s composition on the coordination number of the cations. The activity of the components in metallic melts that are conjugate with the oxide systems is determined by means of the Wagner theory on the basis of first-order reaction parameters. The equilibrium constants of the reduction of steel by the given elements are established by indirect thermodynamic calculations. On the basis of the results, the solubility surface of the components in Fe–Mg–Al–La–O melts is constructed. That permits the identification of regions where the composition of the liquid metal corresponds to a particular oxide phase.

Phase equilibrium occurring during low-carbon iron-based melt deoxidation with silicostrontium

PHASE FORMATION DURING STEEL REFINING BY ALLOYS WITH ALKALINE EARTH ELEMENTS (Ba, Mg, Sr)

THERMODYNAMICS OF THE PROCESSES OF INTERACTION OF LIQUID METAL COMPONENTS IN Fe – Mg – Al – La – O SYSTEM

THERMODYNAMIC MODELING OF PHASE EQUILIBRIA AT STEEL ALLOYED WITH MANGANESE AND CHROME

Thermodynamics of the Interactions in Fe–Mg–Al–La–O Melts

Phase equilibrium in aluminum and calcium treatment economically alloyed manganese steel in units lined with magnesite-based refractories

Thermodynamic analysis of processes in the high-temperature polycomponent Fe–Y–Si–O–C system

Deoxidation Equilibria of Manganese, Silicon, and Aluminum in Iron-Nickel-Chromium Melts

Investigation of Selective Oxidation During Cooling of Hot-Rolled Iron-Manganese-silicon Alloys

Analysis of phase equilibria in liquid chromomanganese steel in the presence of calcium. Report 2. Phase equilibria in the system Fe–Ca–Cr–Mn–C–O (economy-alloy steels).

Analysis of phase equilibria in liquid chromomanganese steel in the presence of calcium. Report 3. Phase equilibria in the system Fe–Ca–Cr–Mn–C–O (high-alloy steel)

Experimental Phase Equilibria Studies in the FeO-Fe2O3-CaO-SiO2 System in Air: Results for the Iron-Rich Region

Potential Utilization of Iron Oxidation Reaction Heat for the Generation of SiO2–FeO System Melts

Phase Equilibria Study of the MgO–CaO–SiO2 Slag System with Ferronickel Alloy, Solid Carbon, and Al2O3 Additions

Synergistic Effect of Strontium and Melt Quenching on the Solidification Microstructure of Hypereutectic Al-Si Alloys

Effect of Silicon and Aluminum Addition on Corrosion Behavior of ODS Iron-Based Alloys in Liquid Lead–Bismuth Eutectic

Y2O3‒SiO2 SYSTEM DIAGRAM

Effect of Silicon–Manganese Deoxidation on Oxygen Content and Inclusions in Molten Steel

Analysis of Fe-, Cu-, Mg- and Sr-Based Phases in Al–Si Alloys: Role of P Addition

Phase Transformation Behavior Of Oxide Scale On Plain Carbon Steel Containing 0.4 Wt.% Cr During Continuous Cooling

Effect of strontium and melt purification on the solidification microstructure of hypereutectic Al-Si alloys