Abstract:Amorphous structures can achieve high mechanical strength and toughness, excellent magnetic properties, anti-corrosion, and anti-friction properties, resulting in their wide applicability, thereby prompting research interest in the role of nanofabrication for amorphous alloys. In this study, the deformation behavior of amorphous alloy Cu50Zr50 during nano cutting was investigated via molecular dynamics simulations. By analyzing the variations of the displacement vector, shear strain, cutting force, and cutting temperature, the removal mechanism of the amorphous alloy material was studied in detail. The amorphous alloy was removed via extrusion during nano cutting. The shear transition zone was formed via the local atomic superposition to form a shear band, and the atoms recovered elastically to form a machined surface. The effects of the cutting depth, cutting speed, and tool angle on the deformation behavior of the material were investigated. The results indicate that the cutting force, cutting temperature, and friction coefficient are increased with an increasing in cutting depth. An appropriate increase in the clearance angle and decrease in the rake angle can reduce the cutting force and friction coefficient. Based on the evolution law of the surface, the plastic transformation of the cutting amorphous alloys was predicted. At the cutting speed of 100–200 m/s, the friction coefficient remained unchanged, which accelerated the formation of a plastic transition zone. For different machining angles, the largest cutting force and surface roughness were obtained at 45°, whereas the least values were obtained at 60°. Therefore, the different machining angle can reduce the cutting forces and improve the quality of the machined surface.

Subsurface Deformation Mechanism in Nano-cutting of Gallium Arsenide Using Molecular Dynamics Simulation

Study on the crack formation mechanism in nano-cutting of gallium arsenide

Study on Mechanism for Material Removal and Surface Generation by Molecular Dynamics Simulation in Abrasive Processes

0701 Molecular Dynamics Simulation of Nano-Contact Between a Diamond Cutting Tool and a Copper Surface

Effect of cutting parameters on the depth of subsurface deformed layers of single γ-TiAl alloy during nano-cutting process

Investigation of Gallium Arsenide Deformation Anisotropy during Nanopolishing via Molecular Dynamics Simulation

Atomic simulation for the effect of nano-cutting parameters on the 3D surface morphology of polycrystalline γ-TiAl alloy

Molecular dynamics simulation study of interaction mechanism between grain boundaries and subgrain boundaries in nano-cutting

Atomic simulation study on the effect of defects on nano-cutting mechanism of single crystal copper

A Numerical Analysis of Ductile Deformation during Nanocutting of Silicon Carbide via Molecular Dynamics Simulation

Nanocutting mechanisms of Cu50Zr50 amorphous alloy: A molecular dynamics simulation

Molecular Dynamics Simulation on the Mechanism of Nanometric Machining of Single-Crystal Silicon

Molecular dynamics simulation of the influence of nanocutting parameters on microstructure of AISI M2

Deformation and removal mechanism of single crystal gallium nitride in nanoscratching

Investigation on nano-grinding process of GaN using molecular dynamics simulation: Nano-grinding parameters effect

Nano-cutting deformation characteristics and atomic-scale behavior of two-phase γ/γ′ nickel-based single crystal superalloy

Material deformation mechanism of polycrystalline tin in nanometric cutting

Effect of Cutting Crystal Directions on Micro-Defect Evolution of Single Crystal γ-TiAl Alloy with Molecular Dynamics Simulation

Molecular dynamics study on mechanical cleavage mechanisms of GaAs and experimental verification

Numerical simulation of nano-cutting behaviors for polycrystalline γ-TiAl alloy: The effect of grain sizes

Molecular Dynamics Analysis for the Influence of Corner Radius on Single Crystal Copper Nano-cutting Process