Abstract:The realization of high interconnect densities for three-dimensional integration demands development of new wafer-to-wafer bonding approaches. Recently introduced Cu-to-Cu wafer-to-wafer hybrid bonding schemes overcome scaling limitations, but like other Cu-based interconnect structures, they are prone to electromigration. Migration and growth of voids, induced by electromigration and mechanical stress, cause Cu-to-Cu hybrid bonds to fail. A comprehensive modeling approach is required to fully understand the complex dynamics of voids with their influencing factors, such as current density, temperature, and mechanical stress. In this work, we utilize such a modeling approach to perform studies of void migration through Cu-to-Cu hybrid bonds. The calculated velocities of the evolving void surface fully correspond to the experimentally observed behavior of voids migrating from the lower pad to the upper diffusion barrier of the upper pad, where they cause electrical failure. The migration velocity of a void in the upper pad is 20% higher than the migration velocity of a void in the bottom pad. Unbalance of the normal velocity distribution at the void surface leads to the transformation of the originally ellipsoid void into a teardrop shape. The simulations provide full insight in the impact of layout geometry, material properties, and operating conditions on void dynamics. In addition, the results enable targeted adjustments of the influencing factors to inhibit void migration and growth in order to delay or to fully prevent Cu-to-Cu hybrid bond failure.

The electric field dependence of Cu migration induced dielectric failure in interlayer dielectric for integrated circuits

Physical Study of Low-frequency TDDB Lifetime Deterioration in Advanced FinFETs

Nonlinear Fdtd Solution To The High-Field Conduction Model For Some Solid Dielectrics

Electromagnetic–Thermo–Mechanical Coupling Behavior of Cu/Si Layered Thin Plate under Pulsed Magnetic Field

Transient Electrothermal Analysis of Multilevel Interconnects in the Presence of ESD Pulses Using the Nonlinear Time-Domain Finite-Element Method

Hybrid Physical Field Simulation: Transient Electro-Thermo-Mechanical Responses Of Interwafer Interconnects Under The Impact Of An Emp

Electrothermal-Stress Interactions of LDMOS FET Induced by DCI RF-Pulses

Electro-Thermo-Mechanical Investigation On Multi-Level Interconnects In The Presence Of An Esd Pulse

Experimental and Numerical Studies of Stress Migration in Cu Interconnects Embedded in Different Dielectrics

Comparison of the Time-Dependent Physical Processes in the Electromigration of Deep Submicron Copper and Aluminum Interconnects

Reliability Studies of Barrier Layers for Cu/PAE Low-K Interconnects.

GHz AC to DC TDDB Modeling with Defect Accumulation Efficiency Model

Grain boundaries-dominated migration failure of copper interconnect under multiphysics field: Insight from theoretical modeling and finite element analysis

Understanding the Impact of Surface Engineering, Structure, and Design on Electromigration Through Monte Carlo Simulation and In‐Situ SEM Studies

TDDB Characteristics of Ultra-Thin HfN/HfO/sub 2/ Gate Stack

The Jumping Dielectric Breakdown Behavior Induced by Crack Propagation in Ferroelectric Materials: A Phase Field Study

Temperature-dependent activation energy of electromigration in Cu/porous low-k interconnects

Numerical simulation of electromigration failure in IC interconnect structures

Reservoir Effect and the Role of Low Current Density Regions on Electromigration Lifetimes in Copper Interconnects

An Electro-Thermo-mechanical Coupling Phase-Field Model of Defect Evolution Induced by Electromigration in Interconnects

Electromigration-induced void evolution and failure of Cu/SiCN hybrid bonds