Abstract:Although a room-temperature multiphase coexistence (MPC) strategy improves the piezoelectric coefficient (d33) of potassium sodium niobate ((K,Na)NbO3, KNN) ceramics, it still suffers from the dependencies on composition and temperature, making it remain challenging to further improve d33 and temperature stability of strain for an already-built MPC. Here, we proposed a new route to resolve this issue, that is, tuning the covalency of A–O bonds in an already-built MPC. We chose 0.96(Na0.60K0.40)(Nb0.955Sb0.045)O3–0.04(Bi0.5Na0.5)ZrO3 ceramics as an already-built MPC and replaced (Bi0.5Na0.5)2+ with Ba2+ to tune the covalency of A–O bonds. Thus, we synthesized 0.96(Na0.60K0.40)(Nb0.955Sb0.045)O3–0.04(Bi0.5Na0.5)1–xBaxZrO3 ceramics. We not only improved d33 values from 450 pC/N (at x = 0) to 500–505 pC/N (at x = 0.05–0.10) but also obtained the enhanced temperature stability for strain at x = 0.10, outperforming that of samples with x = 0 and other KNN-based ceramics. The increased d33 is attributed to the well-preserved MPC and the repaired long-range ordering, and the improved temperature stability of strain is due to shifting the MPC to a slightly higher temperature than room temperature. Therefore, the new route is useful to further improve the performance of an already-built MPC, benefiting to the future design of MPC and the practical application of KNN-based ceramics.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14910?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14910</a>.Composition-dependent XRD patterns (Figure S1); dielectric properties varying with temperature and frequency (Figures S2–S6); Rietveld structural refinements (Figures S7–S10); ferroelectric and strain properties (Figures S11 and S12); unipolar S–E curves and Suni with increasing temperature (Figure S13); poled samples' impedance (|Z|) and phase angle (θ) (Figure S14); Rietveld structural refinements (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14910/suppl_file/am0c14910_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High remnant polarization of (K0.5Na0.5)0.99(Ba0.0025Sr0.0025)NbO3 piezoceramics with nano-CuO sintering aid

Effects of Na Excess on the Preparation and Characterization of (K0.5na0.5)nbo3ceramics

Improvement on ferroelectric and piezoelectric properties of (K 0.5 Na 0.5 )NbO 3 ceramic with Sr 0.53 Ba 0.47 Nb 2 O 6 addition

New K0.48Na0.52NbO3–Bi(Zn0.5Zr0.5)O3 Lead-Free Ceramics: Microstructure and Piezoelectricity

Effects of nano-sized BCZT on structure and electrical properties of KNN-based lead-free piezoceramics

Microstructure and Piezoelectric Properties of CuO-doped 0.95(k0.5na0.5)nbo3–0.05li(nb0.5sb0.5)o3 Lead-Free Ceramics

Structure, piezoelectric performance and liquid phase aid sintering of SiO<Subscript>2</Subscript> doped (K<Subscript>0.5</Subscript>Na<Subscript>0.5</Subscript>) NbO<Subscript>3</Subscript> lead-free ceramics

BNH doping enhances the piezoelectric properties and temperature stability of KNN-based lead-free piezoelectric ceramics

Structure, piezoelectric performance and liquid phase aid sintering of SiO 2 doped (K 0.5 Na 0.5 ) NbO 3 lead-free ceramics

Structure and asymmetric ferroelectric loops of (K0.48Na0.52)NbO3–1mol%CuO–xmol%Co2O3 ceramics with low-temperature sintering

Enhanced Dielectric and Piezoelectric Properties in Li/Sb-modified (na, K)NbO3 Ceramics by Optimizing Sintering Temperature

The phase structure and electric properties of low-temperature sintered (K, Na)NbO3-based piezoceramics modified by CuO

Sintering and Piezoelectric Properties of Potassium Sodium Niobate Ceramics with Newly Developed Sintering Aid

Phase Structure and Polar Characteristics of Alkali Niobate Ceramics Modified by Ba0.6ca0.4zro3

Sintering, Microstructure and Piezoelectric Properties of CuO and SnO2 Co-Modified Sodium Potassium Niobate Ceramics

Processing and Piezoelectric Properties of Lead‐Free (k,na) (nb,ta) O3 Ceramics

One simple approach, two remarkable enhancements: Manipulating defect dipoles and local stress of (K, Na)NbO3-based ceramics

Phase Transitions and Electrical Properties of (1−x)(k0.5na0.5)nbo3−xbisco3 Lead‐free Piezoelectric Ceramics with a CuO Sintering Aid

Sinterability and Piezoelectric Properties of (k,na)nbo3ceramics with Novel Sintering Aid

Composition-insensitive enhanced piezoelectric properties in SrZrO3 modified (K, Na)NbO3-based lead-free ceramics

Tuning the Covalency of A–O Bonds to Improve the Performance of KNN-Based Ceramics with Multiphase Coexistence