Abstract:Ammonia has been proposed as a replacement for fossil fuels. Like hydrogen, emissions from the combustion of ammonia are carbon-free. Unlike hydrogen, ammonia is more energy dense, less explosive, and there exists extensive experience in its distribution. However, ammonia has a low flame speed and combustion emits nitrogen oxides. Ammonia is produced via the Haber-Bosch process which consumes large amounts of fossil fuels and requires high temperatures and pressures. A life cycle assessment to determine potential environmental advantages and disadvantages of using ammonia is necessary. In this work, emissions data from experiments with generating heat from tangential swirl burners using ammonia cofired with methane employing currently available technologies were utilized to estimate the environmental impacts that may be expected. Seven ammonia sources were combined with two methane sources to create 14 scenarios. The impacts from these 14 scenarios were compared to those expected from using pure methane. The results show that using ammonia from present-day commercial production methods will result in worse global warming potentials than using methane to generate the same amount of heat. Only two scenarios, methane from biogas combined with ammonia from hydrogen from electricity and nuclear power via electrolysis and subsequent ammonia synthesis using nitrogen from the air, showed reductions in global warming potential. Subsequent analysis of other environmental impacts for these two scenarios showed potentially lower impacts for respiratory organics, terrestrial acidification-nutrification and aquatic acidification depending on how the burner is operated. The other eight environmental impacts were worse than the methane scenario because of activities intrinsic to the generation of electricity via wind power and nuclear fission. The results show that generating heat from a tangential swirl burner using ammonia currently available technologies will not necessarily result in improved environmental benefits in all categories. Improvements in renewable energy technologies could change these results positively. Other means of producing ammonia and improved means of converting ammonia to energy must continue to be explored.

Computational Fluid Dynamics-Based Efficiency Evaluation of Ammonia Containing Gas Combustion in the Claus Reaction Furnaces

Mathematical Model of the Combustion Process of Hydrogen Sulfide and Ammonia Gases in a Claus Reaction Furnace Using Computational Fluid Dynamics

A Comparative Environmental Life Cycle Assessment of the Combustion of Ammonia/Methane Fuels in a Tangential Swirl Burner

Coordinated Optimization Control of Flue Gas Temperature for Improving Reaction Efficiency of Catalyst

A Direct Numerical Simulation Study on Combustion and NO Formation of Coal/ammonia Co-Firing Flames

CFD Simulation of Flow Field,temperature Field and SO2 Absorption in Flue Gas Quench Tower

CFD-based simulation to reduce greenhouse gas emissions from industrial plants

Simulation Analysis and Optimization of Steam Reforming Process for A Large-Scale Ammonia Plant

Computational Fluid Dynamics Simulation of Combustion and Selective Non-Catalytic Reduction in a 750 T/d Waste Incinerator

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Numerical analysis of ammonia homogenization for selective catalytic reduction application

Process Optimization and Robustness Analysis of Ammonia–Coal Co-Firing in a Pilot-Scale Fluidized Bed Reactor

Numerical Investigation on Promoting Selective Non-catalytic Reduction with Methane Additive by Computational Fluid Dynamics

Development and multi-objective optimization of a newly proposed industrial heat recovery based cascaded hydrogen and ammonia synthesis system

Modelling and Simulation of a Fluidized Bed Reactor for Minimum Ammonium Nitrate and Reduction of NOx Emissions

Process modeling of an advanced NH₃ abatement and recycling technology in the ammonia-based CO₂ capture process

工業炉に適用可能な簡略化反応機構モデルを用いたCFDによるメタン/アンモニア混焼解析

Process Simulation and Optimization of Fluid Catalytic Cracking Unit's Rich Gas Compression System and Absorption Stabilization System

Experimental and computational (Chemical Kinetic + CFD) analyses of Self-Recuperative annular tubular porous burner for NH 3 /CH 4 -air Non-Premixed combustion

CFD simulation for gas dehydration furnace in order to investigate the effects of using radiators novel design and increasing burners number with different arrangements on the pollution reduction and heat transfer enhancement

Optimizing the CO 2 capture and removal process to recover energy and CO 2 from the flue gas of boilers and gas turbines outlet with considering the techno-economic analysis