Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Modelling and Simulation of a Fluidized Bed Reactor for Minimum Ammonium Nitrate and Reduction of NOx Emissions

Multi-Objective Optimization and Chemical Reactor Network Modelling to Estimate the Minimum NOx and Ammonia Slip in an Aviation Combustor

Modeling the partial nitrification in sequencing batch reactor for biomass adapted to high ammonia concentrations

Simulation and optimization of ammonia removal at low temperature for a double channel oxidation ditch based on fully coupled activated sludge model (FCASM): a full-scale study.

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Performance of ANAMMOX-EGSB Reactor

Reduction of Nitric Oxide by Carbonaceous Solids in an Atmospheric Pressure Fluidized-Bed Reactor

Numerical Modeling of a Coal/Ammonia Co-fired Fluidized Bed: Control and Kinetics Analysis of Nitrogen Oxides Emissions

Mixing Effects on NO Reduction by NH3 at Intermediate and Elevated Temperatures in Flow Reactors

CFD analysis of municipal solid waste combustion using detailed chemical kinetic modelling

Removal of nitric oxide in bioreactors: a review on the pathways, governing factors and mathematical modelling

Simulation and Optimization of SNCR Process

Kinetic Modeling of Non-Hydrocarbon/nitric Oxide Interactions in a Flow Reactor above 1,400K

Predictions of the Influent and Operational Conditions for Partial Nitritation with a Model Incorporating Ph Dynamics.

Optimization of an explosive waste incinerator via an artificial neural network surrogate model

Effect of Influent Ammonium Concentration on the Shift of Full Nitritation to Partial Nitrification in a Sequencing Batch Reactor at Ambient Temperature

A Novel Design for Reduction of Ammonium Bisulfate Deposition in the Rotary Air Preheater

An Experimental and Kinetic Modelling Study on the Oxidation of NH3, NH3/H2, NH3/CH4 in a Variable Pressure Laminar Flow Reactor at Engine-Relevant Conditions

MODELING AND EXPERIMENTAL STUDY ON NO_x REDUCTION IN FURNACE WITH AMMONIA INJECTION

Performance analysis, statistical modeling, and multiple response optimization of a novel fixed-bed quartz reactor packed with Ba-Pt@γ-AL2O3 using response surface methodology