Abstract:Stabilization of condensate is a highly energy-consuming process compared to other oil and gas processes. There is a need to reduce this energy consumption. Therefore, the present work aims to simulate the stabilization unit in terms of available energy and on-spec stabilized condensate products. Natural gas condensate liquids (NGL) need to be stabilized by eliminating lighter hydrocarbon gases and acid gases before being sent to the refinery. Stabilized NGL has the vapor pressure determined as a Reid vapor pressure of 7 psia, showing that light components did not evolve as a separate gas phase. Stabilization and CO2 removal was performed through the distillation method by heating and pressure reduction using steady state and dynamic simulation through Aspen HYSYS. Different process alterations around the exchanger and column have been studied based on the utilities available for the stabilization and CO2 removal process. Sensitivity studies, including the impact of CO2 concentration, the temperature at the inlet of the stabilizer flash separator, and the dynamic simulation for the PID controller, have been performed to analyze the impact on the process parameters, such as Reid vapor pressure (RVP) and CO2 of the rundown air cooler and heat duties of the exchangers. Actual plant data have been used for the validation of process simulation values for the accuracy of the condensate stabilization unit model. Based on the scenarios analyzed, it can be concluded that the nitrogen stripping method achieved 7 ppmv CO2 and 7 psia RVP in the condensate from the cooler outlet, while a variation of 29 bpd was observed for the stabilized condensate flowrate throughout all scenarios with data validation showing 0.24% discrepancy between Aspen Hysys data and actual plant data.

Process Simulation and Optimization of Fluid Catalytic Cracking Unit's Rich Gas Compression System and Absorption Stabilization System

Modeling, Simulation and Optimization of a Whole Industrial Catalytic Naphtha Reforming Process on Aspen Plus Platform

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Simulation of Industrial Catalytic Reforming Process by Developing User's Module on ASPEN PLUS Platform

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Process optimization of CO2membrane and cryogenic hybrid separation

A Databased FCC On-line Steady State Optimization System

Integrated Hybrid Modelling and Surrogate Model-Based Operation Optimization of Fluid Catalytic Cracking Process

Economic Operation of a Fluid Catalytic Cracking Process Using Self-Optimizing Control and Reconfiguration

Dynamic and Steady-State Simulation Study for the Stabilization of Natural Gas Condensate and CO2 Removal through Heating and Pressure Reduction

Using Process Simulation Technology to Control Dry Gas Quality for Delayed Coking Units

Design and control of fluid catalytic cracking gasoline fractionator

Robust Engineering Strategy for Scheduling Optimization of Refinery Fuel Gas System

On applying advanced process control for FCCU in a petroleum refinery

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Simulation and multi-objective optimization of liquid hydrocarbons production by coupling Blast Furnace Gas with Coke Oven Gas of steelwork

CFD–DEM Simulation of Gas–solid Reacting Flows in Fluid Catalytic Cracking (FCC) Process

Integrated Optimization for the Coupling Network of Refinery and Synthetic Plant of Chemicals

Optimizing the CO 2 capture and removal process to recover energy and CO 2 from the flue gas of boilers and gas turbines outlet with considering the techno-economic analysis