Abstract:Purpose Through the tracer fiber method, we strive to more accurately obtain the hook degree, straightening degree, percentage and other characteristic indexes. In order to intuitively represent the hook state from sliver to yarn, and feed back production information in combination with quality test. Design/methodology/approach Taking the cotton fiber as an example, the hooked fibers were studied by using the tracer fiber method. Tracer fibers were made from cotton-type viscose fibers. Tracer fibers and combed cotton fibers were uniformly mixed for many times and used to produce the card sliver, semi-drawn sliver, drawn sliver, roving and yarn. With the help of ZF-20D ultraviolet analyzer, geometric parameters of hooked fibers were measured, and characterization indexes were calculated. And hook indexes and quality indexes were compared. Findings By redefining and reclassifying hooked fibers, the change of hooked fibers in the process was tracked and characterized carefully. Some hooks in card sliver are straightened but not eliminated, and will form longer zero-angled hooks in the subsequent process. The straightening degree and number of zero-angled hooks affect the evenness CV mainly. Originality/value The characterization of hooked fibers is important for reducing hooked fibers and spinning high quality yarns. There is no uniform standard for the characterization of hooked fibers at present. Most studies are about relationship between process and hook in carding and drawing. There is no research on hooked fibers in the whole spinning process. In the paper, hooked fibers were redefined and reclassified, the change of hooked fibers in the process was tracked and characterized carefully.

Study on a reducing-hairiness nozzle attached on the winding machine

Discussion the Way and Production Process of Decreasing the Winding Yarn Hairiness

Investigation on Yarn Hairiness Testing

Experimental Study on Decreasing High- Content Polysester and Cotton Blended Yarn Hairiness

A Numerical and Experimental Study on the Effect of the Cone Angle of the Spindle in Murata Vortex Spinning Machine

Approach into Reduction of Fuzzy Yarn of Winding Bobbin

Test and Research on Reducing Yarn Forming Neps

An Investigation of Some Parameter Effects on the Internal Flow Characteristics in the Main Nozzle

Effects of structural parameters on air consumption and mechanical energy characteristics of airflow in the vortex spinning nozzle

Numerical investigation on the dependence of air consumption on injector parameters of the vortex spinning system for producing viscose yarns

Study on Effects of Structural Parameters on Untwisting Performance in Pneumatic Yarn Splicing

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces

Study on the Filament Motion and Joint Forming Mechanism in the Pneumatic Yarn Splicing Process

Numerical Simulation of the Internal Flow Field of a New Main Nozzle in an Air-Jet Loom Based on Fluent

Development and performance study of a new shrink-proof and non-iron cotton blended fabric:

Study on improving the winding forming uniformity of high-speed silk reeling machine with large package

Study on New Winding Technology for Precision Wilding Machine

Optimization and Design of Yarn Suction Duct on Automatic Cone Winding Machine

New Designed Main Nozzle of Air-Jet Weaving Machine for Optimizing Air Consumption using CFD Simulation

Study on Relaxing Effect of Easing Device in Air Jet Looms to Warp Stretching

Study of hooked fiber in cotton yarn based on tracer fiber method