Abstract:Pneumatic compact spinning is one of the most widely used compact spinning systems, which is achieved by utilizing airflow condensing equipment to condense fibers in bundle and improve yarn properties. Therefore, research on flow field in the condensing zone is always the emphasis and difficulty for pneumatic compact spinning. In this paper, the three-dimensional flow field of four different kinds of pneumatic compact spinning systems, including two types of roller-type compact spinning, namely compact spinning with a perforated drum and compact spinning with a groovy drum, and two types of lattice apron-type compact spinning, namely three-line rollers compact spinning and four-line rollers compact spinning, are investigated using the Finite Element Method. Firstly, four three-dimensional physical models of the condensing zone are built by AutoCAD software respectively according to the measured geometric parameters of practical condensing zones. Then, using ANSYS software, the numerical simulations of the three-dimensional flow field in the condensing zone for four kinds of compact spinning systems are obtained. It is shown that the flow field distribution of the condensing zone of roller-type compact spinning is different from that of lattice apron-type compact spinning and the flow field distribution of the condensing zone is significantly related to yarn properties. Comparing with roller-type compact spinning, lattice apron-type compact spinning has lower negative value of the flow velocity in the X-axis direction, a higher value in the Y-axis direction and a higher value in the Z-axis direction. Combined with yarn experiments, it is shown that the flow velocity component in the X-axis direction has an assistant condensing effect and the negative value mainly increases yarn beneficial hairiness. Roller-type compact spinning has a higher negative value and more beneficial hairiness correspondingly than lattice apron-type compact spinning; the flow velocity component in the Y-axis direction has a direct condensing effect, which is of benefit mainly for improving strength and reducing hairiness. Lattice apron-type compact spinning has a higher value and higher strength and less hairiness than roller-type compact spinning; the flow velocity component in the Z-axis direction has an assistant condensing effect, which is mainly of benefit for improving yarn evenness. Lattice apron-type compact spinning has a higher value and better evenness than roller-type compact spinning.

Numerical and Experimental Study on the Principle of Fibers＇ Splice in the Pneumatic Splicer

Study On The Effects Of The Characteristics Of A Vortex On Splice Strength In Pneumatic Yarn Splicing

Splicing Optical Microfibers Via Polymer Nanowires

Numerical study on the flow characteristics in holey optical fibers

Study on the Filament Motion and Joint Forming Mechanism in the Pneumatic Yarn Splicing Process

Study on Effects of Structural Parameters on Untwisting Performance in Pneumatic Yarn Splicing

Filament Fusion of Hollow-Core Photonic Crystal Fiber and Single Mode Fiber: Numerical Simulation and Experimental Analysis

Numerical and experimental study on the joint forming mechanism in the pneumatic splicing process

A Numerical and Experimental Study on the Effect of the Cone Angle of the Spindle in Murata Vortex Spinning Machine

Numerical Simulation and Experimental Verification of Melt-Spinning Parameters' Effects on Multi-Leaf Hollow-Profiled Fiber Preparation

Numerical simulation of dynamic puncture behaviors of woven fabrics based on the Finite Element Method

Studies on the Melt Spinning Process of Noncircular Fiber by Numerical and Experimental Methods

Numerical Simulation Of Fiber Spinning Process With Structure Evolution Of Polymer Chains

Numerical Study of Melt-Spinning Dynamic Parameters and Microstructure Development with Ongoing Crystallization

Splicing Properties of Natural Fiber for Producing Yarns and Their Blends: A Review Paper

Numerical simulation of the three-dimensional flow field in four pneumatic compact spinning using the Finite Element Method

Effect of Different Z-directional Fibers on Mechanical Properties of Composites Using Numerical and Experimental Tests

Unveiling the microstructural evolution and interaction mechanisms for twisted structures

Experimental Investigation of Interlaminar Fracture Toughness of CFRP Composites with Different Stitching Patterns

Investigation of the Properties of Vortex Spinning Polyester Yarn during Warp Knitting

Research on Spinnability of Polyacrylonitrile Solution for Carbon Fibers