Abstract:Experiments and characterization of carbon fiber friction on braiding carriers. Reducing the wear of carbon fibers on braiding carriers is the key to manufacturing high‐performance carbon fiber composite prefabricated parts. In this study, a new analytical model is developed to describe the local friction behavior of yarns on braiding carriers. The degree of yarn wear is characterized by calculating the gray value of carbon fiber hairiness and observing the micro‐surface morphology of carbon fibers. The wear characteristics of carbon fiber yarns under the multi‐factor coupling influences of yarn tension, unwinding speed, and guiding element characteristics were considered. The results show that increases in unwinding angle and unwinding speed both increase the wear of carbon fiber yarns. Eliminating the effect of unwinding angle can reduce the yarn hairiness by more than 60%, alleviate the yarn tension fluctuation by more than 70%, and improve the yarn tension stability by more than 75%. Meanwhile, the relationship between the wrapping angle between the yarn and the yarn bobbin, the unwinding angle, and the yarn tension was established according to the Capstan Equation. A method is proposed to improve the characteristics and spatial position of the guiding elements to obtain more intact yarn and low‐damage yarn surfaces. Highlights A new analytical model for local friction of carbon fibers is developed. The friction‐wear‐fracture mechanism of carbon fiber yarns is constructed. Characterize the degree of yarn wear from a macro and micro perspective. Wear characteristics of carbon fiber yarns under multi‐factor coupling.

Approach into Reduction of Fuzzy Yarn of Winding Bobbin

Research on the Winding/Unwinding Control System Based on Fuzzy Control Theory

Discussion the Way and Production Process of Decreasing the Winding Yarn Hairiness

Test and Research on Reducing Yarn Forming Neps

Optimization and Design of Yarn Suction Duct on Automatic Cone Winding Machine

Design Research on Roller of New Fiber Carding Machine

Study on a reducing-hairiness nozzle attached on the winding machine

TENSION ANALYSIS OF FILAMENT WINDING PROCESS

Finite element modeling and simulation of yarn in winding process

Investigation on Yarn Hairiness Testing

A Robust Detection Method of Yarn Residue for Automatic Bobbin Management System

Approach into Relationship Between Drawing in Back Area and Slippage of Aprons

A Method to Regulate the Shape of Yarn Balloon and Its Effect on the Tension and Quality of Ring Spun Yarn

Simulation-based setting suggestions for yarn winding units to reduce color variation in knitted fabric

Test Analysis of Improving CV Value in Spinning Production

Winding Accumulation of Column Strainer End

Factors Affecting Yarn Twist Unevenness

Tuning drafting zone parameters for polyester yarn within a ring spinning system: modeling and optimization

Design and Implementation of a Cascade Vertical Pulling Artificial Intelligent Automatic Yarn Dropping Robot

Study on the wear characteristics of carbon fiber yarns under the influence of multifactor coupling on braiding carriers

The Detection of Yarn Roll's Margin in Complex Background