Abstract:A method for the determination of trace levels of silicon from biological materials by inductively coupled plasma mass spectrometry (ICP-MS) has been developed. The volatility of water-soluble silicon species, hexafluorosilicic acid (H2SiF6), and sodium metasilicate (Na2SiO3) was investigated by evaporating respective solutions (50 μg/mL silicon) in HNO3), nitric acid + hydrochloric acid (HNO3 + HCl), and nitric acid + hydrochloric acid + hydrofluoric acid (HNO3 + HCl + HF) at 120 °C on a hot-block to near dryness. The loss of silicon from H2SiF6 solutions was substantial (>99%) regardless of the digestion medium. Losses were also substantial (>98%) for metasilicate solutions heated in HNO3 + HCl + HF, while no significant loss occurred in HNO3 or HNO3 + HCl. These results show that H2SiF6 species were highly volatile and potential losses could confound accuracy at trace level determinations by ICP-MS if digestates prepared in HF are heated to eliminate HF. Among the various matrices comprising major elements, sodium appeared to be effective in reducing silicon loss from H2SiF6 solutions. Excess sodium chloride (NaCl) matrix provided better stability, improving silicon recoveries by up to about 80% in evaporated HF digestates of soil and mine waste samples, but losses could not be fully prevented. To safely remove excess acids and circumvent the adverse effects of excess HF (e.g., risk of high Si background signals), a two-step digestion scheme was adopted for the preparation of biological samples containing trace silicon levels. A closed-vessel digestion was performed either in 4 mL of concentrated HNO3 and 1 mL of concentrated HCl or 4 mL of concentrated HNO3, 1 mL of concentrated HCl and 1 mL of concentrated HClO4 on a hot plate at 140 °C. Digestates were then evaporated to incipient dryness at 120 °C to remove the acids. A second closed-vessel digestion was carried out to dissolve silicates in 0.5 mL of concentrated HNO3 and 0.5 mL of concentrated HF at 130 °C. After digestion, digestates were diluted to 10 mL. The solution containing about 5% HNO3 and 5% HF was directly analyzed by ICP-MS equipped with an HF-inert sample introduction system. The limit of detection was about 110 μg/L for 28Si when using the Kinetic Energy Discrimination (KED) mode. The method was used to determine silicon in various plant and tissue certified reference materials. Data were acquired for 28Si using KED and standard (STD) modes, and 74Ge and 103Rh as internal standard elements. There was not any significant difference between the accuracy and precision of the results obtained with 74Ge and 103Rh within the same measurement mode. Precision, calculated as relative standard deviation for four replicate analyses, varied from 5.3 (tomato leaves) to 21% (peach leaves) for plant and from 2.2 (oyster tissue) to 33% (bovine liver) for tissue SRM/CRMs. Poor precision was attributed to material heterogeneity and the large particle size distribution. An analysis of lung tissue samples from those with occupational exposure to silica dust revealed that tissues possessed substantial levels of water-soluble silicates, but the most silicon was present in the particulate matter fraction.

Dry ashing of plant material and dissolution of the ash in HF for the colorimetric determination of silicon

Trace Silicon Determination in Biological Samples by Inductively Coupled Plasma Mass Spectrometry (ICP-MS): Insight into the Volatility of Silicon Species in Hydrofluoric Acid Digests for Optimal Sample Preparation and Introduction to ICP-MS

The determination of silicon in ammonium oxalate extracts of soils

The potential of sodium carbonate and Tiron extractions for the determination of silicon contents in plant samples—A method comparison using hydrofluoric acid digestion as reference

Silicon extraction from x-ray amorphous soil constituents: a method comparison of alkaline extracting agents

Comparative analysis of borate fusion versus sodium carbonate extraction for quantification of silicon contents in plants

Volatilization and determination of monatomic silicon in industrial silicon

Comparison of dry ashing and wet acid digestion on the determination of boron in plant tissue

A New Reducing Agent for Determination of Silicon Content in Water ——mixture of Gibberellin, Glucose and Tin Dichloride

EXTRACTORS FOR ESTIMATING PLANT AVAILABLE SILICON FROM POTENTIAL SILICON FERTILIZER SOURCES

ICP-AES Method with Multicomponent Spectral Fitting Tests Silicon Element in High Silicious Content Alloys

Effects of HF Acid on Dissolution of Elemental Si

Evaluation of Selected Extractants for Plant-Available Silicon in Rice Soils of Southern India

Determination of silicon isotopic composition in soil using gas-source isotope ratio mass spectrometry by thermal decomposition of barium hexafluorosilicate

A new approach for the determination of silicon in airborne particulate matter using electrothermal atomic absorption spectrometry

Changes in solubility and chemical speciation of potassium, calcium, and silicon in wood ash by acid treatment

Microwave plasma atomic emission spectroscopy (MP-AES)—A useful tool for the determination of silicon contents in plant samples?

[Determination of Fe, Al, Ca, Ti, P and Cu in Silicon Metal by XRF].

Determination of the silicon content of geological materials by reactor fast neutron activation analysis

Pouring and Curing for Sample Preparation Technology for the Analysis of the Silicon-Aluminum Ratio of Molecular Sieves by Energy Dispersive X-Ray Fluorescence (EDXRF)

Substituting HF by HBF4- an optimized digestion method for multi-elemental sediment analysis via ICP-MS/MS