Abstract:A method for the determination of trace levels of silicon from biological materials by inductively coupled plasma mass spectrometry (ICP-MS) has been developed. The volatility of water-soluble silicon species, hexafluorosilicic acid (H2SiF6), and sodium metasilicate (Na2SiO3) was investigated by evaporating respective solutions (50 μg/mL silicon) in HNO3), nitric acid + hydrochloric acid (HNO3 + HCl), and nitric acid + hydrochloric acid + hydrofluoric acid (HNO3 + HCl + HF) at 120 °C on a hot-block to near dryness. The loss of silicon from H2SiF6 solutions was substantial (>99%) regardless of the digestion medium. Losses were also substantial (>98%) for metasilicate solutions heated in HNO3 + HCl + HF, while no significant loss occurred in HNO3 or HNO3 + HCl. These results show that H2SiF6 species were highly volatile and potential losses could confound accuracy at trace level determinations by ICP-MS if digestates prepared in HF are heated to eliminate HF. Among the various matrices comprising major elements, sodium appeared to be effective in reducing silicon loss from H2SiF6 solutions. Excess sodium chloride (NaCl) matrix provided better stability, improving silicon recoveries by up to about 80% in evaporated HF digestates of soil and mine waste samples, but losses could not be fully prevented. To safely remove excess acids and circumvent the adverse effects of excess HF (e.g., risk of high Si background signals), a two-step digestion scheme was adopted for the preparation of biological samples containing trace silicon levels. A closed-vessel digestion was performed either in 4 mL of concentrated HNO3 and 1 mL of concentrated HCl or 4 mL of concentrated HNO3, 1 mL of concentrated HCl and 1 mL of concentrated HClO4 on a hot plate at 140 °C. Digestates were then evaporated to incipient dryness at 120 °C to remove the acids. A second closed-vessel digestion was carried out to dissolve silicates in 0.5 mL of concentrated HNO3 and 0.5 mL of concentrated HF at 130 °C. After digestion, digestates were diluted to 10 mL. The solution containing about 5% HNO3 and 5% HF was directly analyzed by ICP-MS equipped with an HF-inert sample introduction system. The limit of detection was about 110 μg/L for 28Si when using the Kinetic Energy Discrimination (KED) mode. The method was used to determine silicon in various plant and tissue certified reference materials. Data were acquired for 28Si using KED and standard (STD) modes, and 74Ge and 103Rh as internal standard elements. There was not any significant difference between the accuracy and precision of the results obtained with 74Ge and 103Rh within the same measurement mode. Precision, calculated as relative standard deviation for four replicate analyses, varied from 5.3 (tomato leaves) to 21% (peach leaves) for plant and from 2.2 (oyster tissue) to 33% (bovine liver) for tissue SRM/CRMs. Poor precision was attributed to material heterogeneity and the large particle size distribution. An analysis of lung tissue samples from those with occupational exposure to silica dust revealed that tissues possessed substantial levels of water-soluble silicates, but the most silicon was present in the particulate matter fraction.

A New Reducing Agent for Determination of Silicon Content in Water ——mixture of Gibberellin, Glucose and Tin Dichloride

Application of Mixture of Gibberellin and Tin Dichloride on Determination of Inorganic Phosphate in Water by Molybdenum Blue Method

Determination of Silicon in Zeolite Molecular Sieves by Molybdosilicate Blue Photometry

Spectrophotometeric Determination of Silicon in Rice Straw and Black Liquor after Rice Straw Alkaline Pulping by Silicomolybdate Blue

A High-Efficiency and Energy-Saving Method for Purifying Industrial Silicon for Silicone Use

Trace Silicon Determination in Biological Samples by Inductively Coupled Plasma Mass Spectrometry (ICP-MS): Insight into the Volatility of Silicon Species in Hydrofluoric Acid Digests for Optimal Sample Preparation and Introduction to ICP-MS

A design of spectrophotometric microfluidic chip sensor for analyzing silicate in seawater

Comparative analysis of borate fusion versus sodium carbonate extraction for quantification of silicon contents in plants

Determination of Trace Silicon in Nickel Sulfate Solution by Solvent Extraction

Determination of silicate in water by ion exclusion chromatography with conductivity detection.

Determination of trace silicon by flow injection/differential kinetic chemiluminescence method

Dry ashing of plant material and dissolution of the ash in HF for the colorimetric determination of silicon

Silicon, Its Forms and Methods of Determination in Water Bodies: A Review

Germanium / silicon ratios of diagenetic chert nodules in the Ediacaran Doushantuo Formation , South China

Study on the extraction and separation of trace silicon from sodium molybdate solution with iso-amyl alcohol

The determination of silicon in ammonium oxalate extracts of soils

Ratiometric Fluorometric Determination of Silver(i) by Using Blue-Emitting Silicon- and Nitrogen-Doped Carbon Quantum Dots and Red-Emitting N-acetyl-L-cysteine-capped CdTe Quantum Dots

Evaluation of Selected Extractants for Plant-Available Silicon in Rice Soils of Southern India

Study of the effect of matrix components of natural mineral water on the determination of dissolved forms of silicon by high-resolution electrothermal atomic absorption spectrometry with a continuous spectrum source

Technical development for in-situ measurement of labile silicate in waters and soils

Mechanically activated zero-valent silicon by coating silica to decolorize Acid Red 73 dye