Abstract:Manufacturing of the 7075 wrought aluminum alloys by selective laser melting technology (SLM) is extremely difficult owing to the inherent low laser absorptivity, poor weldability and cracking. To address these challenges and improve the mechanical properties of the SLM Al 7075 alloy, a novel hierarchical manufacturing method of the selective laser melted Al 7075 alloy from the nanometer scale to the millimeter scale was presented in this study. Nano-WC/Al 7075 sample with fine equiaxed grains was fabricated using SLM. Fewer cracks can be detected within the SLM nano-WC/Al 7075 alloy than the SLM Al 7075 alloy. A large quantity of nano-WC and sintered micro-WC particles were distributed within the equiaxed grains. A well-coherent interface with low lattice mismatch (i.e. 2.03%) is exhibited at the (111)α-Al/(001)WC planes. Al4W, Al2Cu and MgZn2 phases nucleated and grew on the surface of the nano-WC particles. A type of fine microstructure composed of the hierarchically reinforced micro/nano particles is produced in the SLM nano-WC/Al 7075 sample, resulting in an excellent micromechanical properties. Notably, wear rate of the SLM nano-WC/Al 7075 sample is about 40.4% lower than that of the SLM Al 7075 specimen, similarly with that of the SLM Ti6Al4V counterpart. These results highlight that the site-specific and quantitative modification of nano-WC particles of Al 7075 powder can be achieved using electrostatic self-assembly. Therefore, introducing nano-WC particles and generating multiple micro/nano reinforcement phases is an effective method to significantly improve their tribological properties.

Selective laser melting of novel 7075 aluminum powders with internally dispersed TiC nanoparticles

Selective laser melting of 7075 aluminum alloy inoculated by Al–Ti–B: Grain refinement and superior mechanical properties

A novel strategy to additively manufacture 7075 aluminium alloy with selective laser melting

Study on the laser selective melting and forming process and organizational properties of a TiSi 2 -modified 7075 aluminum alloy

Microstructure and Mechanical Properties of Selective Laser Melted Mg-9 Wt%al Powder Mixture

Microstructure and mechanical properties of TiC nanoparticles reinforced 7075 aluminium alloy fabricated by oscillating laser-arc hybrid additive manufacturing

A novel hierarchical manufacturing method of the selective laser melted Al 7075 alloy

Si-Assisted Solidification Path and Microstructure Control of 7075 Aluminum Alloy with Improved Mechanical Properties by Selective Laser Melting

Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2

Facile and cost-effective approach to additively manufacture crack-free 7075 aluminum alloy by laser powder bed fusion

In situ design of ultrafine-grained 7075 Al alloy with laser powder bed fusion

A novel crack-free Ti-modified Al-Cu-Mg alloy designed for selective laser melting

Selective laser melting processing of heterostructured Ti6Al4V/FeCoNiCrMo alloy with superior strength and ductility

Inoculation treatment of an additively manufactured 2024 aluminium alloy with titanium nanoparticles

Microstructure, solidification behavior and mechanical properties of Al-Si-Mg-Ti/TiC fabricated by selective laser melting

Laser powder bed fusion of crack-free TiN/Al7075 composites with enhanced mechanical properties

High-strength and thermally stable TiB2-modified Al–Mn–Mg–Er–Zr alloy fabricated via selective laser melting

Selective Laser Melting of Crack-Free Ti-48Al-2Cr-2Nb Alloy: Improved Manufacturability by Powder Surface Modification Using Graphene Oxide

In situ formation of D022-Al3Ti during selective laser melting of nano-TiC/AlSi10Mg alloy prepared by electrostatic self-assembly

Laser metal deposition for additive manufacturing of AA5024 and nanoparticulate TiC modified AA5024 alloy composites prepared with balling milling process

Selective laser melting of TiB2/AlSi10Mg composite: Processability, microstructure and fracture behavior