Abstract:Semi-solid thixoforming processes rely on a material microstructure made of globular solid grains more or less connected to each other, thus developing a solid skeleton deforming into a liquid phase. During processing, the material structure changes with the processing history due to the agglomeration of the particles and the breaking of the grains bonds. This particular evolutive microstructure makes semi-solid materials behave as solids at rest and as liquids during shearing, which causes a decrease of the viscosity and of the resistance to deformation while shearing. Thixoforming of aluminum and magnesium alloys is state of the art and a growing number of serial production lines are in operation all over the world. But there are only few applications of semi-solid processing of higher melting point alloys such as steel. This can partly be attributed to the high forming temperature combined with the intense high temperature corrosion that requires new technical solutions. However the semi-solid forming of steels reveals high potential to reduce material as well as energy consumption compared to conventional process technologies, such as casting and forging. Simulation techniques exhibit a great potential to acquire a good understanding of the semi-solid material process. Therefore, this work deals with the development of an appropriate constitutive model for semi-solid thixoforming of steel. The constitutive law should be able to simulate the complex rheology of semi-solid materials, under both steady-state and transient conditions. For example, the peak of viscosity at start of a fast loading should be reproduced. The use of a nite yield stress is appropriate because a vertical billet does not collapse under its own weight unless the liquid fraction is too high. Furthermore, this choice along with a non-rigid solid formalism allows predicting the residual stresses after cooling down to room temperature. Several one-phase material modeling have been proposed and are compared. Thermomechanical modeling using a thermo-elasto-viscoplastic constitutive law has been developed. The basic idea is to extend the classical isotropic hardening and viscosity laws to the non solid state by considering two non-dimensional internal parameters. The rst internal parameter is the liquid fraction and depends on the temperature only. The second one is a structural parameter that characterizes the degree of structural build up in the microstructure. Those internal parameters can depend on each other. The internal parameters act on the the viscosity law and on the yield surface evolution law. Di erent formulations of viscosity and hardening laws have been proposed and are compared to each other. In all cases, the semi-solid state is treated as a particular case, and the constitutive modeling remains valid over the whole range of temperature, starting from room temperature to above the liquidus. These models are tested and illustrated by mean of several representative numerical applications.

Predicting the constitutive behavior of semi-solids via a direct finite element simulation: application to AA5182

Constitutive Model of Aviation Aluminum-Alloy Material in Metal Machining

Constitutive Behavior Predictions of Mushy Zone During Solidification by Phase Field Model and Coupled Eulerian–Lagrangian Method

A Physical-Based Plane Stress Constitutive Model for High Strength AA7075 under Hot Forming Conditions

Accurate Finite Element Simulations of Dynamic Behaviour: Constitutive Models and Analysis with Deep Learning

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

A multi-scale constitutive model for AlSi10Mg alloy fabricated via laser powder bed fusion

Finite Element Modeling for Deep-Drawing of Aluminum Alloy Sheet 6014-T4 Using Anisotropic Yield and Non-Afr Models

Prediction of Yield Strength at Room Temperature for Squeeze Cast A226

Numerical Simulation of Semi-Solid Die-Casting Process of Automobile Aluminum Alloy Part

Numerical Analysis of Semi-Solid Die-Casting Automobile Part Based on the Thermo-Visco-Plastic Constitutive Relation

Prediction of location specific mechanical properties of aluminum casting using a new CA-FEA (cellular automaton-finite element analysis) approach

Comparison of Rheological Models to Simulate Die Filling Process of A356 Semisolid Alloy

A macroscopic constitutive model for shape-memory alloys: Theory and finite-element simulations

Establishment of macro-micro constitutive model and deformation mechanism of semi-solid Al6061

Semi-solid constitutive modeling for the numerical simulation of thixoforming processes.

Constitutive model and forming limit prediction of AA5182-O aluminium alloy sheet in electromagnetic forming

Integrating machine learning with mechanistic models for predicting the yield strength of high entropy alloys

Validation of a finite element method for simulation of components produced by continuous carbon fiber reinforced additive manufacturing

Research on the constitutive relationship of semi-solid ZL201 alloy

A microstructure-guided constitutive modeling approach for random heterogeneous materials: Application to structural binders