Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

Boosting Long-Term Stability of Pure Formamidinium Perovskite Solar Cells by Ambient Air Additive Assisted Fabrication

Formamidinium Perovskite Deposition in Ambient Air Environment for Inverted p-i-n Solar Cells

Intermediate-phase engineering via dimethylammonium cation additive for stable perovskite solar cells

Simple Method of Dual Passivation with Efficiency Beyond 20% for Fabricating Perovskite Solar Cells in the Full Ambient Air

HIGHLY STABLE PEROVSKITE FILM WITH IONIC LIQUID ADDITIVES FOR AMBIENT AIR DEPOSITION

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Ambient Fabrication of Organic–Inorganic Hybrid Perovskite Solar Cells

Stable Formamidinium‐Based Perovskite Solar Cells Via in Situ Grain Encapsulation

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

Anti-solvent materials enhanced structural and optical properties on ambiently fabricated perovskite thin films

Lead‐Chelating Intermediate for Air‐Processed Phase‐Pure FAPbI3 Perovskite Solar Cells

Degradation mechanism and stability improvement of formamidine-based perovskite solar cells under high humidity conditions

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Intercepting the Chelation of Perovskites with Ambient Moisture through Active Addition Reaction for Full‐Air‐Processed Perovskite Solar Cells

Fabrication of perovskite solar cells in ambient air by blocking perovskite hydration with guanabenz acetate salt

A Universal Strategy of Intermolecular Exchange to Stabilize α ‐FAPbI 3 and Manage Crystal Orientation for High‐Performance Humid‐Air‐Processed Perovskite Solar Cells

Fully Solution Processed Pure α‐Phase Formamidinium Lead Iodide Perovskite Solar Cells for Scalable Production in Ambient Condition

A Double Compatibilization Strategy To Boost the Performance of p - i - n Solar Cells Based on Perovskite Deposited in Humid Ambient Air

Moisture‐induced High‐quality Perovskite Film in Air for Efficient Solar Cells

Efficient and Stable Perovskite Solar Cells by Fluorinated Ionic Liquid–Induced Component Interaction