Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

Formamidinium Perovskite Deposition in Ambient Air Environment for Inverted p-i-n Solar Cells

Boosting Long-Term Stability of Pure Formamidinium Perovskite Solar Cells by Ambient Air Additive Assisted Fabrication

A Double Compatibilization Strategy To Boost the Performance of p - i - n Solar Cells Based on Perovskite Deposited in Humid Ambient Air

Fabricating Α-Fapbi3 Perovskite Photovoltaics in Ambient Air by DMSO Extraction

Inhibition of Halide Oxidation and Deprotonation of Organic Cations with Dimethylammonium Formate for Air-Processed P–i–n Perovskite Solar Cells

Slot-die coating of a formamidinium-cesium mixed-cation perovskite for roll-to-roll fabrication of perovskite solar cells under ambient laboratory conditions

Fabrication of Efficient CH3NH3PbI3 Solar Cells in Ambient Air

Lead‐Chelating Intermediate for Air‐Processed Phase‐Pure FAPbI3 Perovskite Solar Cells

Simple Method of Dual Passivation with Efficiency Beyond 20% for Fabricating Perovskite Solar Cells in the Full Ambient Air

Modification of Nickel Oxide via Self-Assembled Monolayer for Enhanced Performance of Air-Processed FAPbl 3 Perovskite Solar Cells

Stable Formamidinium‐Based Perovskite Solar Cells Via in Situ Grain Encapsulation

A green solvent system for precursor phase-engineered sequential deposition of stable formamidinium lead triiodide for perovskite solar cells

Achieving Efficient and Stable Perovskite Solar Cells in Ambient Air Through Non‐Halide Engineering

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Fully Solution Processed Pure α‐Phase Formamidinium Lead Iodide Perovskite Solar Cells for Scalable Production in Ambient Condition

Stabilizing black-phase formamidinium perovskite formation at room temperature and high humidity

On the synergistic interplay between annealing temperature and time and additive concentration for efficient and stable FAPbI 3 perovskite solar cells

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Self-assembly of porphyrins on perovskite film for blade-coating stable large-area methylammonium-free solar cells

Low-cost, stable all-inorganic charge transporting layer based FAPI perovskite solar cells achieving ≈ 26% efficiency using SCAPS-1D

Ambient air processed highly oriented perovskite solar cells with efficiency exceeding 23% via amorphous intermediate