Abstract:The conditions of formation of inclusions in steel during ladle refining in MgO‐C lined ladles have been investigated in laboratory experiments at 1873 K in MgO‐C crucibles with 50 g iron. From both the experimental results as well those of a thermodynamic study conducted in parallel, the following conclusions can be made about the reaction mechanism between the MgO‐C refractory and aluminium deoxidised molten steel: At steelmaking temperature an internal oxidation‐reduction occurs in the MgO‐C refractory. The formation of a thin oxide layer at the interface is due to the reaction between magnesium vapour and aluminium dissolved into the molten steel and the CO(g) generated by the reaction between MgO and C in the crucible walls. The oxide inclusions formed in the steel have been shown mainly to consist of MgO, Al2O3 or mixture of them. Some of the finest inclusions are considered to be formed as secondary inclusions during cooling and solidification of the steel and they are connected only with the diffusion of magnesium from the crucible to the molten steel. The thermodynamic calculations indicate that during vacuum refining, as the pressure decreases, the chemical compatibility of carbon‐bonded magnesia for ladle lining decreases. Die Bedingungen für die Einschlußbildung in Stahl während der sekundärmetallurgischen Behandlung in Pfannen mit MgO‐C‐Ausmauerung wurden im Labormaßstab bei 1600°C in MgO‐C‐Tiegeln mit 50g Eisen untersucht. Sowohl die Versuchsergebnisse als auch die Resultate der gleichzeitig durchgeführten thermodynamischen Studie lassen folgende Schlüsse hinsichtlich der Reaktion zwischen der MgO‐C‐Ausmauerung und dem Aluminium‐desoxidierten flüssigem Stahl zu: Bei den Stahlherstellungstemperaturen erfolgt eine Redox‐Reaktion innerhalb der MgO‐C‐Ausmauerung. Die dünne Oxidschicht an der Phasengrenze bildet sich aufgrund der Reaktion zwischen Magnesiumdämpfen und Aluminium das in der Schmelze gelöst ist, und CO(g), das aus der Reaktion von MgO und C in der Tiegelwand frei wird. Die Oxideinschlüsse, die sich im flüssigen Stahl bilden, bestehen größtenteils aus MgO·Al2O3 oder einer Mischung von den beiden. Einige der winzigen Einschlüsse sind wahrscheinlich während der Abkühlung und Erstarrung des Stahles als Sekundäreinschlüsse entstanden. Dies steht in engem Zusammenhang mit der Magnesiumdiffusion aus dem Tiegel in die Schmelze. Die thermodynamischen Berechnungen zeigen, daß die chemische Kompatibilität des kohlenstoffgebundenen MgO für die Pfannenauskleidung während der Vakuumbehandlung ‐wenn der Druckt sinkt‐ abnimmt.

Steel/refractory/slag interfacial reaction and its effect on inclusions in high-Mn high-Al steel

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Influence of Slag and Refractory Materials on Inclusions during the Ladle Refining of Low Carbon Aluminum Killed Steel

Influence of refining slag composition on nonmetallic inclusions in 38CrMoAl steel

Formation of ferrospinel layer at the corroded interface between Al 2 O 3 ‐spinel refractory and molten steel in RH refining ladle

The Study on the Interface Reaction Characteristics of Different Binary Slag, CaO – MgO, Al2O3 – CaO, Al2O3 – MgO, SiO2 – CaO, SiO2 - MgO

Influence of Refractory-Steel Interfacial Reaction on the Formation Behavior of Inclusions in Ce-containing Stainless Steel

Effect of Al2O3 on the Molten Slag Microstructure Information by Molecular Dynamics Simulation and Experimental Analysis

Evolution and Formation of Non-metallic Inclusions During Electroslag Remelting of a Heat-Resistant Steel for Ultra-supercritical Power Plants

Impact of slag–refractory lining reactions on the formation of inclusions in steel

A study on the mechanism of reaction between refractory materials and aluminium deoxidised molten steel

Influence of Refining Slag on Transformation and Separation of Nonmetallic Inclusions in 316L Stainless Steel

Effect of Refractory on Nonmetallic Inclusions in Si–Mn‐Killed Steel

Reduction of CaO and MgO Slag Components by Al in Liquid Fe

Formation of Plastic Inclusions in U71Mnk High-Speed Heavy-Rail Steel Refined by CaO-SiO 2 -Al 2 O 3 -MgO Slag

Effect of low basicity refining slag on evolution and removal of oxide inclusions in 55SiCrA spring steel

Effect of Interface Property on the Agglomeration Characteristic of Inclusions in High Al Steel with Different Al Contents

Al Alloy Melting Behavior and Interfacial Reactions with Steel Under Natural Convection

Revolution and Control of Fe-Al-(Mg, Ti)-O Oxide Inclusions in IF Steel during 260t BOF-RH-CC Process

Phase equilibrium in aluminum and calcium treatment economically alloyed manganese steel in units lined with magnesite-based refractories