Abstract:A thorough understanding of the reactor core thermal hydraulic behavior is essential for the design and safety analysis of Sodium-cooled Fast Reactors (SFR). Due to the application of hexagonal subassembly, the core thermal hydraulic behavior is significantly affected by the flow field within the subassemblies, the inter-wrapper region and the hot pool. Analysis of the core thermal hydraulic behavior requires a model coupling the three regions mentioned above, which has been identified as one of the thermal hydraulic challenges in SFR. In the present study, a 3D model that covers the three regions was developed for the core of the China Experimental Fast Reactor (CEFR) with the Computational Fluid Dynamic (CFD) code, Fluent. The inter-wrapper region and the hot pool were modeled in detail, while the subassemblies were modeled with a special porous medium model. The core thermal hydraulics behavior under steady state was studied, more specifically, information for the flow field distribution at the core outlet, the inter-wrapper flow and the duct wall temperature distribution was obtained. Under steady state, liquid sodium in the inter-wrapper region is supplied by the inner region of the hot pool. And it enters the inter-wrapper region from the core outer region and returns back to the hot pool inner region from the core central region. The inter-wrapper flow is cooled by non-fuel subassemblies and heated up by fuel subassemblies. For non-fuel subassembly, the ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies could reaches 96%; for fuel subassemblies, the maximum ratio of the total heat transfer rate between the inter-wrapper flow and the subassemblies to the heat generated within subassemblies is 2.45%. Significant temperature gradients have been observed on the duct wall, with maximum values of 156.69 K/m in the vertical direction and 2,196.00 K/m in the circumferential direction. The largest temperature gradient appears on the duct of subassemblies adjacent to the transition region of fuel subassemblies and non-fuel subassemblies.

Investigation of Thermal Striping in Prototype Fast Breeder Reactor Using Ten-Jet Water Model

Development of a Benchmark for Thermal Striping in Gas-Cooled Fast Reactors

Validation of a Methodology for Thermal Stratification Analysis in Sodium-Cooled Fast Reactors

Experimental Study on Temperature Fluctuations on Plate Surface Induced by Coaxial-Jet Flow

Numerical Study on Thermal Stress Fluctuation Caused by Coaxial-Jet Flow in Lower Head of Central Measurement Column

Thermal Mixing Test Of Coolant In The Core Bottom Structure Of A High-Temperature Engineering Test Reactor

Steady-State Thermal-Hydraulic Analysis of A Plate Type Reactor

Numerical Simulation of the Transient Flow Characteristics and Thermal Stratification Phenomena in the Passive Residual Heat Removal System of NHR-200-II

VALIDATION OF A CODE AND EFFECT OF TURBULENCE MODEL ON PREDICTING THERMAL STRATIFICATION PHENOMENA IN THE UPPER PLENUM OF SFR

Coupled neutronics and thermal-hydraulics transient simulation of a gas-cooled reactor in the aircraft nuclear propulsion system

Thermal analysis of baffle jetting in fuel rod assembly

Analysis of Flow Distribution in Plate-Type Core Affected by Uneven Inlet Temperature Distribution

Analysis of Thermal Stratification Effects in the Ring Headers of the Passive Residual Heat Removal System of NHR-200-II

Assessment of 1-D Channel Flow Models for Tritium Breeding Blanket Cooling

Thermal fatigue analysis of structures subjected to liquid metal jets at different temperatures in the Gen-IV nuclear energy system

Numerical Investigation on Heat Transfer Features of Gas-Cooled Open Lattice Reactor in Normal Operations

Cfd Analysis of Heat Transfer in Subchannels of A Super Fast Reactor

Thermal Hydraulic Modeling of a Natural Circulation Loop

Optimization Analysis of Nuclear Thermal Coupling for a Small Nuclear Thermal Propulsion (sntp) Reactor

Numerical investigation on the core thermal hydraulic behavior of pool-type sodium-cooled fast reactor (SFR)

Analysis on Flow Characteristic of Nuclear Heating Reactor