Abstract:With the rapid development of the semiconductor industry, the feature size of integrated circuits (ICs) is continuously getting smaller and smaller. Although traditional optical lithography and extreme ultraviolet (EUV) lithography can fabricate products with 5-nm feature size, the production cost is quite high. As a candidate of next-generation lithography, ultraviolet nanoimprint lithography (UV-NIL) can also achieve high-resolution imprints at a lower cost. Based on contact mechanics, the filling mechanism and imprint quality of UV-NIL were examined using high-resolution stamps with different feature sizes of 3 nm, 4 nm, and 5 nm. It was found that UV-NIL could successfully replicate patterns with feature sizes down to 3 nm; however, the imprinting process was more complicated. Among the selected nine stamps, the replications of 4-nm and 5-nm feature sizes had a relatively uniform residual layer and a symmetric contact pressure, whereas the replications of 3-nm feature size had an asymmetric contact pressure, resulting in an asymmetric residual layer. In order to obtain a more uniform residual layer with higher-quality imprinting, the pressure applied to the left and right sides of a stamp should be appropriately changed. The pattern density of a stamp had a certain influence on the contact pressure. As the pattern density increased, the contact pressure tended to be uniform; however, when the pattern density exceeded 0.5, the situation became worse. This research can provide guidance for promoting the development of UV-NIL in the direction of high-resolution pattern replication.

High accuracy UV-nanoimprint lithography step-and-repeat master stamp fabrication for wafer level camera application

Rapid Prototyping of Soft Lithography Masters for Microfluidic Devices Using Dry Film Photoresist in a Non-Cleanroom Setting

High fidelity 3D thermal nanoimprint with UV curable polydimethyl siloxane stamps

Research on the Filling Process of Ultraviolet Nanoimprint Lithography with High-Resolution Stamps

Large area nanosize array stamp for UV-based nanoimprint lithography fabricated by size reduction process

Three-dimensional nanoimprint lithography using two-photon lithography master samples

A Microlens Array with Different Focal Lengths Fabricated by Roll-To-Roll UV Lithography

Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography

Fabrication of Nanostructures on a Large-Area Substrate with a Minimized Stitch Error Using the Step-and-Repeat Nanoimprint Process

Micro-print and nano-imprint methods combining laser-drilled screen printing and ultraviolet nanoimprint lithography: a review

Step-and-Repeat Nanoimprint-, Photo- and Laser Lithography from One Customised CNC Machine

Application of Lift-Off Process in Fabricating Nanoimprint Stamp

Overlay Accuracy Limitations of Soft Stamp UV Nanoimprint Lithography and Circumvention Strategies for Device Applications

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

UV-based nanoimprinting lithography with a fluorinated flexible stamp

Nanoimprint lithography technology

Single digit nanofabrication by step-and-repeat nanoimprint lithography

Novel method to mass-produce PDMS stamps based on nanoimprint

Development of a Step Micro-Imprint Lithography Tool

The Development of Nanoimprint and the Photosensitive Resin

Design And Fabrication Of Wafer-Level Microlens Array With Moth-Eye Antireflective Nanostructures