Abstract:Microstructure has significant effects on the mechanical properties of AlSi10Mg alloy. Therefore, an in-depth understanding of microstructure evolution, such as dendrite and Al-Si eutectic, is of great significance to obtain the desirable microstructure and manage the performance of AlSi10Mg components. In the current work, an integrated dendrite and eutectic evolution model based on the cellular automaton-finite difference (CA-FD) method, taking account of solute distribution, growth kinetics, and nucleation mechanism, was established. Microstructures of the as-built selective laser melted (SLMed) samples were characterized by optical microscopy (OM), scanning electron microscopy (SEM) and electron backscatter diffraction (EBSD) techniques, and the experimental results showed that the microstructure consisted of Al grains and Al-Si eutectic networks in the individual melt pool. Dendrite growth, solute redistribution in ternary alloy and dendritic morphologies with different cooling rates were numerically investigated. In addition, the proposed model was also applied to predict the Al-Si eutectic evolution, and eutectic morphologies under eutectic undercooling in a range of 5 K to 20 K were also simulated. The simulated results indicated that dendrites were refined with the increasing of the cooling rates, and Al-Si eutectic morphology was sensitive to eutectic undercooling such that higher eutectic undercooling refined the eutectic microstructures. Model validations were performed, and the experimental results agreed well with the simulation results, indicating that the proposed model can successfully reproduce both dendrite and eutectic microstructures.

Understanding the formation process of shrinkage pores with a 3D dendrite growth model: from casting to additive manufacturing

A multi-grid Cellular Automaton model for simulating dendrite growth and its application in additive manufacturing

An integrated microporosity model of 3D X-ray micro-tomography and directional solidification simulations for Ni-based single crystal superalloys

Multi-scale Modeling of Solidification Process of Ni-based Superalloy Investment Castings

Formation and evolution mechanisms of pores in Inconel 718 during selective laser melting: Meso-scale modeling and experimental investigations

On the dendrite deformation and evolution mechanism of Ni-based superalloy during directional solidification

Impact of fluid flow on the dendrite growth and the formation of new grains in additive manufacturing

Modelling and Experiments Concerning Dendrite Re-Melting and Its Role in Microstructural Evolution in Spray Formed Ni Superalloys

COLUMNAR DENDRITE MORPHOLOGY AND SOLUTE CONCENTRATION OF GH3039 NICKEL-BASED SUPERALLOYS DURING WIRE AND LASER ADDITIVE MANUFACTURING: INSIGHTS FROM PHASE FIELD SIMULATIONS

Numerical Simulation of Dendrite Growth in Ni-based Superalloy Casting During Directional Solidification Process

Four-Phase Dendritic Model for the Prediction of Macrosegregation, Shrinkage Cavity, and Porosity in A 55-Ton Ingot

Numerical Simulation of Dendrite Growth of Aluminum Alloy

Study of Dendrite Growth with Natural Convection in Superalloy Directional Solidification Via a Multiphase-Field-lattice Boltzmann Model

Modeling and Simulation Investigations on Microstructure Evolution during Additive Manufacturing of AlSi10Mg Alloy

3D Stochastic Modeling of Grain Structure for Aluminum Alloy Casting

Multiphase and multiphysics modeling of dendrite growth and gas porosity evolution during solidification

3D Modeling and Simulation of Dendritic Growth During Solidification

Anisotropic sintering shrinkage behavior of stainless steel fabricated by extrusion-based metal additive manufacturing

Numerical simulation of microporosity evolution of aluminum alloy castings

Macro-Micro Coupled Simulation of SLM Process with Inconel 718 Superalloy

Multiphase Model for the Prediction of Shrinkage Cavity, Inclusion and Macrosegregation in a 36-Ton Steel Ingot