Abstract:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Ahead of Print. Wheel bearings play a crucial role in ensuring the smooth and reliable rotation of wheels in automotive applications. Grease is commonly used as a lubricant in wheel bearings. The physical properties of grease, such as viscosity, base oil type, and thickener composition, significantly influence the overall performance and longevity of wheel bearings. This study investigates the impact of grease's physical properties on wheel bearing friction torque and service life. To evaluate the effects of different grease formulations, a series of experiments were conducted using a four-ball tester, rheometer, and a custom-built test rig to measure bearing frictional torque and service life. Multiple greases with varying viscosity grades, base oil types (mineral oil, synthetic oil), and thickener compositions (lithium, diurea, and polyurea) were tested under controlled operating conditions. Friction torque measurements were obtained using a high-accuracy torque sensor, while service life was determined by monitoring the bearing life in actual endurance testing. The results indicated that grease physical properties directly affected wheel bearing friction torque and service life. Low to Medium-viscosity greases generally exhibited 35–40% lower friction torque due to enhanced lubrication film formation and reduced metal-to-metal contact however, excessively high viscosity resulted in 50–60% higher frictional torque and thereby increased energy consumption. Different base oil types showed varying friction reduction and service life level, with mineral oil in some cases showed lower frictional torque around 30–40% particularly at high temperature but with significant reduction in the service life. Furthermore, the thickener composition significantly influenced grease performance. Based on these findings, selecting the appropriate grease with optimal physical properties is crucial for minimizing friction torque and extending the service life of wheel bearings.

The Grease Worker and Its Applicability to Study Mechanical Aging of Lubricating Greases for Rolling Bearings

On the Required Energy to Break Down the Thickener Structure of Lubricating Greases

Modeling Grease Mechanical Degradation with Entropy at Moderate Shear Rates

The effect of thickener structure degradation on tribological properties: Study on the decay mechanism of polyurea grease under mechanical-thermal aging conditions

A Coarse Grained Molecular Dynamics Model for the Simulation of Lubricating Greases

Study of the changes in the microstructures and properties of grease using ball milling to simulate a bearing shear zone on grease

Application of Elastic/Plastic Rheological Model in Characteristics Analysis of Elastohydrodynamic Lubrication of Grease

Study on rheological characteristics of a grease used in high speed bearing

Application of Raman Spectroscopy to Evaluate the Structure Changes of Lubricating Grease Modified with Montmorillonite after Tribological Tests

Grease Lubrication: Formulation Effects on Tribological Performance

Impact of grease physical properties on the friction torque and service life of wheel bearings

Elastohydrodynamic Lubrication Analysis on Line Contact Lubricated with Grease

Development of Wear and Pitting Curves with Vibration Analysis for Lubricating Grease under Contamination Conditions

Rheological and Tribological Properties of Lithium Grease and Polyurea Grease with Different Consistencies

Study of grease lubricated journal bearing with partial surface texture

A Rheological Model for Lithium Lubricating Grease

Film Thickness Decay and Replenishment in Point Contact Lubricated with Different Greases: A Study into Oil Bleeding and the Evolution of Lubricant Reservoir

Lubricant Shear Thinning Analysis of Engine Journal Bearings

Experimental Study of the Effect of Thickener on the Film Thickness in the Contacts of a Grease-Lubricated Ball Bearing at Low Speed

Data-driven rheological characterization of stress buildup and relaxation in thermal greases

Prediction of bleeding behavior and film thickness evolution in grease lubricated rolling contacts