Abstract:Isothermal oxidation of microcrystalline Ni–11.5Cr–4.5Co–0.5Al (wt%) superalloy sheet fabricated by electron beam physical vapor deposition (EB-PVD) at 900°C in air was investigated. Mass gain curves were obtained on testing the alloy in dry air. And characterization of the surface morphology and cross-sections was performed on samples isothermally oxidized for different exposure times. Surfaces and cross-sections of the oxidized specimens were studied by scanning electron microscopy (SEM). Phase identification of the oxide scale was performed by glancing angle X-ray diffraction (GAXRD) and energy dispersive X-ray microanalysis (EDX). The experiment results indicated that the oxidation kinetics of microcrystalline Ni–11.5Cr–4.5Co–0.5Al superalloy sheet follows a cubical power law at initial oxidation stage and fourth power law for long oxidation terms. The oxide scales consisted mainly of a mixed oxide at initial oxidation stage and a double-layer scale with an outer NiO oxide layer, and inner mixed oxides exposed for long terms at 900°C. The fine oxide grains could be formed on microcrystalline superalloy surface. Taking the short circuit diffusion through grain boundaries into account, an oxidation kinetic with cubical power law in mixed oxide and fourth power law in single-phase oxide were derived. And the excellent fitting of the present model to the experimental data was obtained. The results suggested that the growing oxide layer of microcrystalline Ni–11.5Cr–4.5Co–0.5Al superalloy sheet, which controlled the ionic transportation, contained mainly mixed oxide at initial oxidation stage and the scale/substrate interface single-phase oxide for long terms.

On the Development of a Protective Oxide System in Rare Earth Oxide Coated Nickel Superalloy under Isothermal Oxidation Conditions

Preparation and Enhanced Isothermal Oxidation Resistance of a Low Diffusivity NiRePtAl Single-Phase Coating

Understanding the Oxidation Behaviors of a Ni-Co-based Superalloy at Elevated Temperatures Through Multiscale Characterization

Improving Cyclic Oxidation Resistance of Ni3Al-based Single Crystal Superalloy with Low-Diffusion Platinum-Modified Aluminide Coating

Delayed parabolic oxidation via transient thermal exposures on a polycrystalline nickel-based superalloy

Effect of Re-base Diffusion Barrier on the Oxidation Performance of a Gradient NiCoCrAlY Coating

Structural Evolution of a Ni Alloy Surface During High-Temperature Oxidation

Oxide-Scale Evolution on a New Ni–Fe-Based Superalloy at High Temperature

Oxidation Kinetics of Microcrystalline Ni–11.5Cr–4.5Co–0.5Al Superalloy Sheet Fabricated by Electron Beam Physical Vapor Deposition at 900 °C

Oxidation behavior of a nickel-based single crystal superalloy at 1100 °C under different oxygen concentration

Effects of rare-earth elements on the oxidation behavior of γ-Ni in Ni-based single crystal superalloys: A first-principles study from a perspective of surface adsorption

High Temperature Oxidation Behavior of Ni-based High Entropy Superalloys

Preparation and Oxidation Behavior of NiCrAlY Coatings with Re-base Diffusion Barrier on a Nickel-Based Single-Crystal Superalloy

A Magnetron Sputtered Microcrystalline Β-Nial Coating for SC Superalloys. Part II. Effects of a NiCrO Diffusion Barrier on Oxidation Behavior at 1100 °C

Effect of coatings on oxidation behavior of a fourth generation Ni-based single crystal superalloys at ultra high temperature

Oxidation Behavior of Graded NiCrAlYRe Coatings at 900, 1000 and 1100 °C

High-temperature Oxidation Behaviour of Refurbished (ni,pt)al Coating on Ni-based Superalloy at 1100 °C

High Temperature Performance and Interface Evolution of a NiCoCrAlY Coating with Pt Modification and Re-based Diffusion Barrier

Oxidation Behavior of Aluminide Coatings on Cobalt-Based Superalloys by a Vapor Phase Aluminizing Process

Oxidation behavior of 4774DD1 Ni-based single-crystal superalloy at 980 °C in air

Oxidation Behavior and Oxide Transformation of a Pt-Modified Aluminide Coating at Moderate High Temperature