Abstract:Poly(vinylidene fluoride) (PVDF) membranes possessing interconnected bicontinuous structures with superior mechanical properties and improved hydrophilicity were obtained from PVDF/N,N-dimethylacetamide (DMAc)/Tween 80/water systems via non-solvent induced phase separation (NIPS) with 60 °C and ambient temperature casting solution. Tween 80/H2O mixtures were adopted as dopant; water/ethanol (50:50, mass ratio) and ethanol were chosen as coagulants. The effects of process parameters in terms of variations in dopant contents, casting solution temperatures, and coagulant compositions on the phase inversion process and performance of the resultant membranes were investigated. During the demixing process, water diffused from the interior of Tween 80 reverse micelles, resulting in an accelerated precipitation rate and surface segregation process of the polar head groups of Tween 80. The high temperature of the casting solution contributed to enhancing the diffusion rate of liquid–liquid demixing on crystallization. The coagulant compositions changed the liquid–liquid and solid–liquid demixing dynamics of the casting solutions. Ethanol coagulant contributed to crystallization of PVDF/DMAc/Tween 80/water systems prior to liquid–liquid demixing. This delayed demixing process favored the formation of porous foliage-type top structures with fibril or lath bicontinuous fine structure of membrane bulk, increasing flux, and significant hydrophilicity improvement. Casting solutions in water/ethanol coagulant exhibited a less delayed demixing process with both liquid–liquid demixing and crystallization, resulting in formation of fine structure in the form of strings or stripes and limited hydrophilicity improvement. The predominant typical α- and β-type crystallinity in PVDF was attributed to the existence of dopants, the high temperature of the casting solution, and water/ethanol coagulant. This was consistent with the superior mechanical properties of the corresponding PVDF membrane. The newly developed hydrophilic PVDF membranes with superior mechanical properties and low-fouling of bovine serum albumin (BSA) are anticipated to be suitable not only for wastewater treatment, but also for bioseparation.

The effect of casting solution composition on surface structure and performance of poly(vinylidene fluoride)/multi-walled carbon nanotubes (PVDF/MWCNTs) hybrid membranes prepared via vapor induced phase separation

Effect of solvent concentration on development of macrovoids of PVDF phase-diversion membranes

Effects of Preparing Condition on PVDF Membrane Morphology

Effect of the Casting Solvent on the Crystal Characteristics and Pervaporative Separation Performances of P(Vdf-Co-Hfp) Membranes

In Situ Crosslinking of Hyperbranched Polyglycerol in Casting Solutions and Its Effect on the Structure and Properties of Porous Pvdf Membranes

Influence of Solvents on the PVDF Membrane Properties

Triblock copolymers of methyl methacrylate/N-vinyl pyrrolidone and their hydrophilication effects on poly(vinylidene fluoride) porous membranes

Influence of additives on phase separation process of PVDF solution and membrane morphology

MICROPOROUS PVDF-HFP-BASED POLYMER MEMBRANES FORMED FROM SUPERCRITICAL CO2 INDUCED PHASE SEPARATION *

Preparation of PVDF membrane via synergistically vapor and non-solvent-induced phase separation

Characterization and Preparation of Poly(vinylidene Fluoride) (PVDF) Microporous Membranes with Interconnected Bicontinuous Structures Via Non-Solvent Induced Phase Separation (NIPS)

Formation of an interconnected lamellar structure in PVDF membranes with nanoparticles addition via solid-liquid thermally induced phase separation

Effect of TiO2 Nanowire Addition on PVDF Ultrafiltration Membrane Performance

Preparation and gas separation performance of PVAm/PVA/MWCNT mixed matrix membrane

[Effects of Nanoscale Oxide Particles on Structure and Property of PVDF Hollow Fiber Membrane].

Preparation of Polyvinylidene Fluoride (pvdf) Membranes Via Nonsolvent Induced Phase Separation Process Using A Tween 80 and H2o Mixture As an Additive

Preparation of hydrophobic PVDF/PVC/nano-graphite composite membrane and its self-cleaning properties

Effect of the molecular weight and its distribution of polyvinylidene fluoride on the relationship between the spinning process, microstructure and properties of hollow fiber membranes via thermally induced phase separation

Effects of Nucleating Agents on the Morphologies and Performances of Poly(Vinylidene Fluoride) Microporous Membranes Via Thermally Induced Phase Separation

Hyperbranched-polymer functionalized multi-walled carbon nanotubes for poly (vinylidene fluoride) membranes: From dispersion to blended fouling-control membrane

Effects of Mixed Solvents and PVDF Types on Performances of PVDF Microporous Membranes