Abstract:Oxidation resistance of titanium aluminide (TiAl) based alloys is a fundamental aspect for the high-temperature structural applications such as in the advanced hypersonic aircraft engines and gas turbines. The aim of this study was to identify oxidation kinetics and mechanisms through detailed microstructural characterization of a newly-developed Ti-44Al-4Nb-1.5Cr-0.5Mo-0.1B-0.1Y alloy via focused ion beam (FIB), transmission electron microscopy (TEM), X-ray diffraction (XRD), electron probe microanalysis (EPMA), scanning transmission electron microscopy (STEM), along with density functional theory (DFT) calculations. The alloy consisting mainly of γ-TiAl/α2-Ti3Al lamellar structure exhibited a superior oxidation resistance at 700 °C, and followed parabolic oxidation kinetics at 800 °C and 900 °C. The observed multi-layered scale structure consisted of TiO2, Al2O3-rich, Al2O3+TiO2, H-Ti2AlN+Al2O3+α2-Ti3Al, Z-Ti5Al3O2+AlNb2+Laves-(Ti,Nb)Cr2, and H-Ti2AlN/α2-Ti3Al lamellae from the outside to inside after high-temperature oxidation. The γ-TiAl/α2-Ti3Al lamellae near the scale/substrate interface were first transformed into H-Ti2AlN/α2-Ti3Al lamellae, with orientation relationships identified as ( 0001 ) α 2 / / ( 0001 ) T i 2 A l N , ( 10 1 ¯ 0 ) α 2 / / ( 10 1 ¯ 0 ) T i 2 A l N and [ 1 2 ¯ 10 ] α 2 / / [ 1 2 ¯ 10 ] T i 2 A l N . The H-Ti2AlN/α2-Ti3Al lamellae were then transformed into a metastable Z-Ti5Al3O2 phase at the scale/substrate interface. The Z-phase was decomposed to Ti3Al and Al2O3 as the scale/substrate interface moved inwardly. Ti3Al reacted further with oxygen and nitrogen to form Ti2AlN, which was finally oxidized to form TiO2 and α-Al2O3. A Nb-rich layer was present beneath the scale along with the formation of AlNb2 and Laves phase, and the doping effect of Nb to suppress the diffusion of oxygen occurred mainly in the TiO2+Al2O3 compound layer. The results obtained in this study would pave the way for the development of advanced oxidation-resistant TiAl-based materials for high-temperature applications.

Effect of niobium alloying level on the oxidation behavior of titanium aluminides at 850°C

Thermal Oxidation Behaviour of Ti6Al7Nb and Ti6Al4V Alloys

Surface Characterization of Thermally Oxidized Titanium Alloys

Initial Oxidation Behavior in Air of TiAl-2Nb and TiAl-8Nb Alloys Produced by Electron Beam Melting

Mechanical Properties and Oxidation Characteristics of TiNiAl(Nb) Intermetallics

Effect of Nb on the High Temperature Oxidation of Ti–(0–50 At.%)al

Resistance to High-Temperature Oxidation of Ti-Al-Nb Alloys

Thermodynamic and microstructural study of Ti2AlNb oxides at 800 °C

Microstructural evolution and high-temperature oxidation mechanisms of a titanium aluminide based alloy

Oxidation Behaviour of New Nickel-Base Superalloys with Varying Aluminium: Niobium Ratio

High-Temperature Oxidation of NbTi-Bearing Refractory Medium- and High-Entropy Alloys

High-Temperature Oxidation Resistance of High-Nb TiAl-Based Alloy

Microstructure and High Temperature Properties of Nb2O5/TiO2 Coatings by Micro-arc Oxidation

Non-Isothermal Oxidation Behaviors and Mechanisms of Ti-Al Intermetallic Compounds.

Oxidation characteristics of gamma-TiAl-8Nb coated with a CrAlYN/CrN nanoscale multilayer coating

The Effect of Nb, Ta, and Ti on the Oxidation of a New Polycrystalline Ni-Based Superalloy

Oxidation behavior of Ti-Nb-Mo-Al-Six refractory high entropy alloy at 1000°C

High-throughput experiment-assisted study of the alloying effects on oxidation of Nb-based alloys

High Temperature Oxidation Behavior of Ni-based High Entropy Superalloys

Cyclic oxidation behavior of Nb/Mn/Si alloying beta-gamma TiAl alloys

Oxidation behaviour of Ti-V-Cr-Nb-Ta and Al-Ti-V-Cr-Ta refractory high entropy Alloys: Effects of Nb and Al Substitutions