Abstract:Investment casting process is an important way to get complex parts of titanium alloy. However there are few research on the interfacial heat transfer coefficient(h) between casting and shell thus the temperature simulation of investment casting process of titanium alloy is often inaccurate. In order to get a relatively accurate h,a one-dimensional mathematical model for the reverse calculation of h between casting and shell in investment casting process of Ti6Al4 V alloy was built and the analytic relationship between temperature and time/heat flux was established. Considering the calculated h is significantly affected by the error of parameters such as the specific heat capacity and thermal diffusivity of shell and position of thermocouples, research on the error of these parameters is essential. The relationship between the error of these parameters and the temperatures in the casting and shell was studied and it was found that the effect of different kind of error on the temperature field was obviously different.An experiment based on the one-dimensional mathematical model was done and temperatures of different positions were measured. Based on the effect of different kind of error and the difference between the calculate temperature field and the measured temperatures, the proportion of effect of each kind of error was assessed. These errors were revised on the basis of the assessment, thus a relatively accurate h between the casting and shell was obtained. The relationships between h and thickness of the solidified layer on the casting/temperature at the surface of casting can be divided into 4 stages:(1) Metal was liquid and h kept about 440 W/(m2·K);(2) Solid layer appeared on the surface, and h declined nearly 60%;(3) Solid layer grew up before metal became completely solid and h declined nearly 20% of its maximum;(4) After metal solidified, h declined slowly as temperature on the surface of casting dropped. These relationships were applied in a three-dimensional model for numerical simulation of the temperature field. Temperatures of different positions in casting and shell were calculated and calculated temperatures agreed with measured ones well. Thus the accuracy of h was identified and it can help solve problems in the production in investment casting process of Ti6Al4 V alloy.

Thermal Conductivity of Investment Casting Ceramics

An Experimental Characterization of Thermophysical Properties of a Porous Ceramic Shell Used in the Investment Casting Process

Thermal Property Database for Investment Casting Shells

Calculational and Experimental Investigation into the Thermal Conductivity of Materials of Ceramic Casting Molds. I. Experiment

Calculational and Experimental Investigation into the Thermal Conductivity of Materials of Ceramic Casting Molds. II. Calculation

Thermal Conductivity of Cast Iron - A Review

RESEARCH ON THE INTERFACIAL HEAT TRANSFER COEFFECIENT BETWEEN CASTING AND CERAMIC SHELL IN INVESTMENT CASTING PROCESS OF Ti6Al4V ALLOY

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Alumina-Based Ceramic Core Nano-Composites For Investment Casting

Research progress in thermal conductivity of SiCceramics

Numerical Calculations of Effective Thermal Conductivity of Porous Ceramics by Image-Based Finite Element Method

Numerical Analysis of Effective Thermal Conductivity of Mixed Solid Materials

Thermomechanical behavior of alumina–magnesia castables and numerical modeling of the steel ladle thermal process

Research on Thermal Conductivity of Thermal Barrier Coatings

Improving High Temperature Properties of Alumina Based Ceramic Cores Containing Yttria by Vacuum Impregnating

Thermal Conductivity of LTCC

Towards Better Characterizing Thermal Conductivity of Cement-Based Materials: the Effects of Interfacial Thermal Resistance and Inclusion Size

Effect of Pore Shape on the Thermal Conductivity of Partially Saturated Cement-Based Porous Composites

Dynamic Response of Ceramic Shell for Titanium Investment Casting under High Strain-Rate SHPB Compression Load

Thermal Conductivity Optimization of Porous Alumina Ceramics via Taguchi Model

Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics