Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics

Chao Fan,Xin-Lin Xia,Wei Du,Chuang Sun,Yang Li

DOI: https://doi.org/10.1016/j.icheatmasstransfer.2022.106097

IF: 6.782

2022-06-01

International Communications in Heat and Mass Transfer

Abstract:To further understand the heat transfer behavior of open-cell alumina ceramics, the FVM combined with an improved mesh-agglomeration Monte Carlo ray-tracing method is developed to solve the coupled conductive-radiative heat transfer in open-cell alumina ceramics, where the spectral radiative properties are dealt with gray-band model. The radiative behavior of tomography-based foams and cinema4d-based foams are analyzed and compared, which indicates that the radiative characteristics of the two types of foams are very similar. On the basis of this, cinema4d-based foams with various porosities are used for the evaluation of effective/radiative thermal conductivity, where the porosity and temperature ranges from 0.5 to 0.8 and 1400 to 2000 K, respectively. The results show that for different temperature/porosities, the variation range of the effective thermal conductivity is limited (2.7–5.0 W/m·K), however, the variation range of the share of thermal radiation /conduction is very large. It can be also found that when the porosity is low, the thermal conduction dominates; when the porosity is high and the temperature is high, the effect of thermal radiation becomes important and accounts for >75% of the coupled conductive-radiative heat transfer. These findings can provide a deeper understanding of the conductive-radiative heat transfer in alumina ceramics.

thermodynamics,mechanics