Abstract:Fundamental understanding of turbulent flow and heat transfer in composite porous-fluid systems, which consists of a fluid-saturated stochastic open-cell metal foam and a flow passing over it, is crucial for fostering technological development in numerous applications such as transpiration cooling in aerospace, packed-bed thermal storage and thermal management of electronic devices. In this work, conjugate heat transfer simulations were adopted to explore the turbulent flow and heat transfer features in a composite porous-fluid system at the pore scale. Simulations were performed to account for the influence of the blockage ratios (i.e., BR = 0.5, 0.8 and 1.0) on pressure drop and heat transfer rate by introducing a new concept called penetration cooling length. Furthermore, the effect of Reynolds numbers (i.e., Re = 1800, 3600 and 7200) at different blockage ratios was investigated in terms of pressure drop, fluid and solid temperatures, interstitial heat transfer coefficient, and flow leakage. Results indicate that for a fixed blockage ratio, as the Reynolds number increases by a factor of 3.0, there is a 14.9-fold increase in the pressure drop and a 2.9-fold increase in the interstitial heat transfer coefficient. Additionally, for a fixed Reynolds number, when the blockage ratio increases by a factor of 2.0, there is a 6.8-fold increase in the pressure drop and a 1.8-fold increase in the interstitial heat transfer coefficient. Flow visualization indicated that the penetration cooling length is influenced by flow leakage from the porous-fluid interface. Results show at small blockage ratios and low Reynolds numbers, a significant portion of the flow from the porous region leaves it to the clear region on top of the porous block. While, at high Reynolds numbers and large blockage ratios, the flow leakage is reduced. Additionally, for a low blockage ratio ( BR < 0.5), the amount of flow leakage depends on the Reynolds number, while it is independent of the Reynolds number for BR > 0.8. Finally, this study introduces a novel correlation for the interstitial heat transfer coefficient derived from conjugate heat transfer pore-scale simulations. The correlation is established on the basis of Reynolds number, blockage ratio, and development length of the metal foam, offering valuable insights into heat transfer phenomena in porous media.

Image-based finite element modeling of air flow and thermal transport in Al-fiber-sintered porous materials

Theoretical and Experimental Investigation of Flow Rate Characteristics of Sintered Metal Porous Media

Optimization of Thermal Conductivity of Alumina-Filled Composites by Numerical Simulations

Numerical investigations of the coupled conductive-radiative heat transfer in alumina ceramics

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

Numerical Simulation of Fluid Flow and Convection Heat Transfer in Sintered Porous Plate Channels

Comparison of convective heat transfer in metal foam-filled channels of three different cross-sections

Fabrication of Carbon Fiber Oriented Al–Based Composites by Hot Extrusion and Evaluation of Their Thermal Conductivity

Study of enhanced heat transfer performance of subcooled and saturated flow boiling with R365mfc on sintered porous coating high heat flux tubes

Heat Conduction Models of Interfacial Effects for TiB2–Al2O3/epoxy Composites

Experimental and Numerical Investigation of Forced Convection Heat Transfer of Air in Non-Sintered Porous Media

Experimental Research on Convection Heat Transfer in Sintered Porous Plate Channels

Micro-CT image-based computation of effective thermal and mechanical properties of fibrous porous materials

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Investigation of Transport Property of Fibrous Media: 3D Virtual Modeling and Permeability Calculation

On the Hydrodynamics of Macroporous Structures: Experimental, CFD and Artificial Neural Network Analysis

Numerical investigation of heat transfer in aluminum nitride ceramics with engineered microstructures

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams

Numerical Study on Fluid Flow Behavior and Heat Transfer Performance of Porous Media Manufactured by a Space Holder Method