Abstract:Lithium metal anodes can largely enhance the energy density of rechargeable batteries because of the high theoretical capacity and the high negative potential. However, the problem of lithium dendrite formation and low Coulombic efficiency (CE) during electrochemical cycling must be solved before lithium anodes can be widely deployed. Herein, a new atomic layer deposition (ALD) chemistry to realize the low-temperature synthesis of homogeneous and stoichiometric lithium fluoride (LiF) is reported, which then for the first time, as far as we know, is deposited directly onto lithium metal. The LiF preparation is performed at 150 °C yielding 0.8 Å/cycle. The LiF films are found to be crystalline, highly conformal, and stoichiometric with purity levels >99%. Nanoindentation measurements demonstrate the LiF achieving a shear modulus of 58 GPa, 7 times higher than the sufficient value to resist lithium dendrites. When used as the protective coating on lithium, it enables a stable Coulombic efficiency as high as 99.5% for over 170 cycles, about 4 times longer than that of bare lithium anodes. The remarkable battery performance is attributed to the nanosized LiF that serves two critical functions simultaneously: (1) the high dielectric value creates a uniform current distribution for excellent lithium stripping/plating and ultrahigh mechanical strength to suppress lithium dendrites; (2) the great stability and electrolyte isolation by the pure LiF on lithium prevents parasitic reactions for a much improved CE. This new ALD chemistry for conformal LiF not only offers a promising avenue to implement lithium metal anodes for high-capacity batteries but also paves the way for future studies to investigate failure and evolution mechanisms of solid electrolyte interphase (SEI) using our LiF on anodes such as graphite, silicon, and lithium.

Low-temperature fabrication of lithium aluminum oxide phosphate solid electrolyte thin films from aqueous precursors

Fabrication of Thin Solid Electrolytes Containing a Small Volume of an Li3OCl-type Antiperovskite Phase by RF Magnetron Sputtering

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Fabrication Of Ultrathin Solid Electrolyte Membranes Of Beta-Li3ps4 Nanoflakes By Evaporation-Induced Self-Assembly For All-Solid-State Batteries

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of Beta-Li3ps4 Via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Novel PEO-based composite electrolyte for low-temperature all-solid-state lithium metal batteries enabled by interfacial cation-assistance

Thin Free-Standing Sulfide/Halide Bilayer Electrolytes for Solid-State Batteries Using Slurry Processing and Lamination

Sol–gel-processed amorphous inorganic lithium ion electrolyte thin films: sol chemistry

Robust and Manufacturable Lithium Lanthanum Titanate-Based Solid-State Electrolyte Thin Films Deposited in Open Air

Nanoscale Solid State Batteries Enabled By Thermal Atomic Layer Deposition of a Lithium Polyphosphazene Solid State Electrolyte

Low-cost and facile synthesis of LAGP solid state electrolyte via a co-precipitation method

Cathode-electrolyte material interactions during manufacturing of inorganic solid-state lithium batteries

Room-temperature fabrication of garnet-type solid-electrolyte: Optimizing particle size for high ionic conductivity

Slurry Casted Ultrathin Li3Zr2Si2PO12 Electrolyte Film for Solid‐State Lithium Metal Batteries

Low-Temperature Lonothermal Synthesis of Li-Ion Conductive Li4B7O12Cl Solid-State Electrolyte

Ammonia-free synthesis of lithium manganese iron phosphate cathodes via a co-precipitation reaction

Designing electrolytes with polymerlike glass-forming properties and fast ion transport at low temperatures

Low-Temperature Manufacture of Cubic-Phase Li7La3Zr2O12 Electrolyte for All-Solid-State Batteries by Bed Powder

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Isomeric Li–La–Zr–O Amorphous–Crystalline Composite Thin-Film Electrolytes for All-Solid-State Lithium Batteries

Locally Concentrated Ionic Liquid Electrolytes Enabling Low-Temperature Lithium Metal Batteries