Abstract:High ionic conductivity, excellent mechanical and thermal properties, and good inhibiting ability for lithium dendrites are essential requirements for polymer solid electrolytes (SEs). In this work, a flexible polypropylene oxide-based SE film was prepared by combining the bis[3-(methyldimethoxysilyl)]-terminated polypropylene oxide (BSPPO) high polymer with ZrO2 fillers, the succinonitrile (SN) plasticizer, and the cellulose membrane framework. The cross-linking reaction of the BSPPO oligomer initiated by lithium bis(oxalate)borate at the addition of SN and ZrO2 improves the ionic conductivity of the prepared SE as high as 9.619 × 10–4 S cm–1 at room temperature with a high ion migration number of 0.8 and a high potential window of 5 V. The excellent mechanical strength, thermal stability, and good lithium dendrite inhibition ability greatly enhance the safety of the electrolyte in the use of lithium batteries. The assembled NCM622/SE/Li solid-state batteries can be stably cycled at a current density of 0.1–1 C. This safety-enhanced rigid-flexible BSPPO–ZrO2 composite SE film with high ionic conductivity is expected to be widely used in high-performance solid-state lithium batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acssuschemeng.1c02886.Preparation flow chart of the BSPPO-15 wt % ZrO2 CSE film; SEM and EDS mapping images of the BSPPO-20 wt % ZrO2 CSE membrane; long-time cycling performance curves of NCM622/BSPPO-5, 10, 15, 20 wt % ZrO2 CSE/Li batteries at a 0.5 C rate; second and 80th cycle charge and discharge curves of NCM622/BSPPO-5, 10, 15, 20 wt % ZrO2 CSE/Li batteries; FTIR spectra of pure BSPPO, pristine BSPPO SE, and BSPPO-15 wt % ZrO2-30 wt % SN CSE (2000–4000 cm–1); measured values for the corresponding parameters and lithium-ion migration numbers (tLi+); and measured values for the corresponding parameters and ion conductivities (PDF)This article has not yet been cited by other publications.

Slurry Casted Ultrathin Li3Zr2Si2PO12 Electrolyte Film for Solid‐State Lithium Metal Batteries

Tape-Casting Li0.34La0.56TiO3 Ceramic Electrolyte Films Permit High Energy Density of Lithium-Metal Batteries

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Thin, flexible sulfide-based electrolyte film and its interface engineering for high performance solid-state lithium metal batteries

Ultrathin polymer electrolyte film prepared by in situ polymerization for lithium metal batteries

A high ionic conductive PDOL/LAGP composite solid electrolyte film for Interfacial Stable solid-state lithium batteries

Plasma optimized Li7La3Zr2O12 with vertically aligned ion diffusion pathways in composite polymer electrolyte for stable solid-state lithium metal batteries

The Synthesis and Application of Llzo Ultrathin Electrolyte Film

Combining Organic Plastic Salts with a Bicontinuous Electrospun PVDF-HFP/Li7La3Zr2O12 Membrane: LiF-Rich Solid-Electrolyte Interphase Enabling Stable Solid-State Lithium Metal Batteries.

Rational design of ultrathin composite solid-state electrolyte for high-performance lithium metal batteries

A homogenous solid polymer electrolyte prepared by facile spray drying method is used for room-temperature solid lithium metal batteries

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Ultra-Long-Life and Ultrathin Quasi-solid Electrolytes Fabricated by Solvent-free Technology for Safe Lithium Metal Batteries

Flexible PVA/BMIMOTf/LLZTO composite electrolyte with liquid-comparable ionic conductivity for solid-state lithium metal battery

Safety-Enhanced Flexible Polypropylene Oxide–ZrO 2 Composite Solid Electrolyte Film with High Room-Temperature Ionic Conductivity

Porous film host-derived 3D composite polymer electrolyte for high-voltage solid state lithium batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

In-Situ Plasticized LLZTO-PVDF Composite Electrolytes for High-Performance Solid-State Lithium Metal Batteries

3D nanofiber framework based on polyacrylonitrile and siloxane-modified Li6.4La3Zr1.4Ta0.6O12 reinforced poly (ethylene oxide)-based composite solid electrolyte for lithium batteries

A Study on PVDF-PEO-Li7La2.5Ce0.5Zr1.625Bi0.3O12 Solid Electrolyte with High Ionic Conductivity and Its Application in Solid-State Batteries