A high ionic conductive PDOL/LAGP composite solid electrolyte film for Interfacial Stable solid-state lithium batteries

Zhen-hao Huang,Mao-xiang Jing,Peng-qin Wang,Wen-wen Shao,Zhi-peng Zhang,Gang Zhang,Xiang-qian Shen

DOI: https://doi.org/10.1016/j.ceramint.2022.10.074

IF: 5.532

2022-12-22

Ceramics International

Abstract:High ionic conductivity for solid electrolyte and stable electrode/electrolyte interface have always been the main requirements for solid-state lithium batteries. Herein, a high ionic conductive composite solid electrolyte (CSE) film was prepared by combining 1.3-dioxolanes (DOL) capable of in-situ polymerization with high ionic conductive Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP)ceramic fillers. The CSE film also shows high interface compatibility and stability with lithium metal. The optimized poly-DOL (PDOL)-30% LAGP CSE exhibits a desirable dense and uniform structure, which endows the CSE with a high ion conductivity of 4.63 × 10 −4 S cm −1 , a high ion migration number up to 0.73 and a wide electrochemical stability window of 5.1 V. The assembled high-voltage NCM622/PDOL-30%LAGP CSE/Li solid-state cell exhibits good rate and cycle performances with a capacity of 125 mAh/g at 2 C and a capacity retention of 76% at 0.5C after 400 cycles with an average Coulomb efficiency of 99.7%. The PDOL-30%LAGP CSE also possesses a high inhibition ability of lithium dendrites owing to the dense and uniform structure and the stable electrolyte/lithium electrode interface including Li–Ge, LiF and CF 3 components. The Li/CSE/Li cell maintains a relatively stable voltage up to 650 h at a current density of 0.1 mA/cm 2 . This high ionic conductive composite solid electrolyte film shows a good application prospect in high-voltage solid-state lithium batteries.

materials science, ceramics