Abstract:Lithium-ion batteries have been used as energy sources not only for small electronic devices but also for high-capacity and high-energy-density applications such as electric vehicles. However, the use of flammable organic liquid electrolytes in lithium-ion batteries has raised safety concerns in various applications. Therefore, solid-state batteries using flame-retardant inorganic materials are considered a more reasonable direction for future energy sources due to their high safety and high energy density. Solid electrolytes(SEs) are divided into oxide-based, sulfide-based, and polymer-based. Each solid electrolyte has its own advantages and disadvantages. Oxide-based solid electrolytes (e.g., Li 7 La 3 Zr 2 O 12 (LLZO), Li 3x La 2/3-x TiO 3 (LLTO), Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP)) are air-stable and exhibit excellent electrochemical properties over a wide potential range. However, their high interfacial resistance may limit their practical application as batteries. Sulfide-based solid electrolytes (e.g., Li 6 PS 5 X (X=Cl, Br, I), Li 10 GeP 2 S 12 , (100-x)Li 2 S-xP 2 S 5 )) have high ionic conductivity, ductile properties, low interfacial resistance, and good room temperature workability. However, they are vulnerable to atmospheric instability, which can produce toxic gases such as H 2 S, and are relatively electrochemically unstable with Li metal. Polymer-based solid electrolytes, such as those made from polymers like PEO, PVDF, PAN, etc. that are compounded with other solid electrolytes (oxides, sulfides, etc.), offer the advantage of being able to form solid electrolyte membranes over large areas. But they have low ionic conductivity and weak mechanical properties of the polymer itself, limiting their practical application. To apply solid-state batteries to practical high-energy density energy storage devices such as electric vehicles, high ion conductivity, electrochemical stability, high mechanical properties, and large area formation of the electrolyte layer are essential. Solid electrolytes are mainly formed in powder form, and without a polymer binder, it is limited to apply as a film for large-capacity storage devices. Here, we fabricated a freestanding sheet-type Al-LLZO oxide-based solid electrolyte that forms a 3D network without a polymer material using an electrospinning method. In addition, we prepared a oxide-sulfide composite solid electrolyte membrane by impregnating LPSCl sulfide-based solid electrolyte into the Al-LLZO solid electrolyte sheet. As a result, This process removed the polymer and improved both the ionic conductivity and mechanical properties. Furthermore, it was possible to achieve both large-area and film characteristics without the need for a polymer.

Fabrication Of Ultrathin Solid Electrolyte Membranes Of Beta-Li3ps4 Nanoflakes By Evaporation-Induced Self-Assembly For All-Solid-State Batteries

Fabrication of Sub-Micrometer-Thick Solid Electrolyte Membranes of Beta-Li3ps4 Via Tiled Assembly of Nanoscale, Plate-Like Building Blocks

Solid Electrolytes: Fabrication of Sub‐Micrometer‐Thick Solid Electrolyte Membranes of β‐Li3PS4 via Tiled Assembly of Nanoscale, Plate‐Like Building Blocks (Adv. Energy Mater. 21/2018)

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

Anomalous High Ionic Conductivity of Nanoporous Β-Li3ps4

Design of Ultrathin Asymmetric Composite Electrolytes for Interfacial Stable Solid-State Lithium-Metal Batteries

Ultrathin All‐Inorganic Halide Solid‐State Electrolyte Membranes for All‐Solid‐State Li‐Ion Batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

Thin Free-Standing Sulfide/Halide Bilayer Electrolytes for Solid-State Batteries Using Slurry Processing and Lamination

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Flexible Electrolyte and Cathode Membranes for All-Solid-State Batteries Fabricated by a One-Step Solvent Method

Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination

A Large‐Scale Fabrication of Flexible, Ultrathin, and Robust solid Electrolyte for Solid‐State Lithium‐Sulfur Batteries

Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries

In Situ Fabrication of Solvent-Free Solid Polymer Electrolytes for Wide-Temperature All-Solid-State Lithium Metal Batteries

Nanoscale Solid State Batteries Enabled By Thermal Atomic Layer Deposition of a Lithium Polyphosphazene Solid State Electrolyte

Solvent-Free Approach for Interweaving Freestanding and Ultrathin Inorganic Solid Electrolyte Membranes

Binderless Sheet-Type Oxide-Sulfide Composite Solid Electrolyte for All-Solid-State Batteries

Thin and Flexible Solid Electrolyte Membranes with Ultrahigh Thermal Stability Derived from Solution-Processable Li Argyrodites for All-Solid-State Li-Ion Batteries