Abstract:Development of solid-state batteries with a high voltage cathode and lithium metal anode could enable high energy density while avoiding safety issues of flammable liquid electrolytes. However, the solid electrolyte (SE) should meet multiple requirements, including 1) electrochemical stability at both the cathode and anode side interfaces, 2) small thickness (tens of μm) to maximize energy density of the cell, and 3) fabrication with a scalable manufacturing method. Using bilayer SEs with different electrochemical stability windows could enable stability at both cathode|SE and anode|SE interfaces. In this work, we developed a manufacturing process to fabricate thin (60 μm) free-standing bilayer SE films from slurry casting and lamination, which can be used for large scale manufacturing of SSBs. Halide SE (Li 3 InCl 6 ) and sulfide SE (Li 6 PS 5 Cl) were slurry casted on different substrates, and then were dried in vacuum before being laminated onto each other to make a free-standing bilayer film. The parallel slurry casting approach eliminates cross-compatibility requirements of the solvents used for slurry preparation. The resulting bilayer films after densification were pin-hole free without intermixing between the two phases. The ionic conductivity of the bilayer SE film was ~70% of the bilayer SE pellet (1 mm thickness in total) made with a conventional powder pressing method. However, because the thickness of bilayer SE film (60 μm) was much smaller than the bilayer SE pellet (1 mm), the bilayer SE film had ~10x lower area-specific resistance (ASR) compared to the bilayer SE pellet. Because of the lower total cell resistance, the cell made with the bilayer SE film had a better rate capability compared to the reference cell in pellet geometry. The strategy developed in this work could be integrated into current manufacturing infrastructure of battery fabrication as it is based on slurry casting, which is already a well-established fabrication method for lithium-ion batteries. Moreover, it could be used to fabricate multi-layered solid-state architectures in general, which are challenging to manufacture due to solvent compatibility issues during slurry casting. The study will assist the progress of solid-state battery manufacturing by providing a scalable manufacture method to prepare thin free-standing bilayer SEs.

Thin and Flexible Solid Electrolyte Membranes with Ultrahigh Thermal Stability Derived from Solution-Processable Li Argyrodites for All-Solid-State Li-Ion Batteries

Thin and Flexible Solid Electrolyte Membranes with Ultrahigh Thermal Stability Derived from Solution-Processable Li Argyrodites for All-Solid-State Li-Ion Batteries

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

Solvent-Free Approach for Interweaving Freestanding and Ultrathin Inorganic Solid Electrolyte Membranes

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination

Surface modification of perforated separator for more robust and thinner all‐solid‐state electrolyte membrane

Stable Binder Boosting Sulfide Solid Electrolyte Thin Membrane for All-Solid-State Lithium Batteries

Amphipathic Binder Integrating Ultrathin and Highly Ion‐Conductive Sulfide Membrane for Cell‐Level High‐Energy‐Density All‐Solid‐State Batteries

Phase-Transition-Promoted Interfacial Anchoring of Sulfide Solid Electrolyte Membranes for High-Performance All-Solid-State Lithium Battery

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

Flexible Electrolyte and Cathode Membranes for All-Solid-State Batteries Fabricated by a One-Step Solvent Method

Thin Free-Standing Sulfide/Halide Bilayer Electrolytes for Solid-State Batteries Using Slurry Processing and Lamination

A Large‐Scale Fabrication of Flexible, Ultrathin, and Robust solid Electrolyte for Solid‐State Lithium‐Sulfur Batteries

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

LiI-Doped Sulfide Solid Electrolyte: Enabling a High-Capacity Slurry-Cast Electrode by Low-Temperature Post-Sintering for Practical All-Solid-State Lithium Batteries

Ultrathin All‐Inorganic Halide Solid‐State Electrolyte Membranes for All‐Solid‐State Li‐Ion Batteries

A High-Performance, Solution-Processable Polymer/ceramic/ionic Liquid Electrolyte for Room Temperature Solid-State Li Metal Batteries

Solid-State Plastic Crystal Electrolytes: Effective Protection Interlayers For Sulfide-Based All-Solid-State Lithium Metal Batteries