Abstract:Silicon has attracted extensive research attention in lithium-ion battery (LIB) field due to its high theoretical specific capacity (~3600 mAh/g) and cost-effectiveness. In recent years, silicon has emerged as a viable candidate for anode material for solid-state battery (SSB) technology. Similar to its application in LIBs, silicon utilizing in SSBs encounters challenges, such as significant volume variation (~300%) during cycling and poor cycling performance. In addition, the utilization of silicon in SSB faces another critical bottleneck in ionic conductivity due to the absence of liquid electrolyte. To address these challenges, various pioneering studies have explored potential solutions, including controlling the thickness of silicon anode to be below 150 nm,(1) fabricating electrodes with a combination of silicon and solid-state electrolyte (e.g, Garnet-type electrolyte(2) and sulfide electrolyte(3)), subjecting SSBs to a high pressure (10-50 MPa)(4). Here, we introduced an alternative approach to mitigate these challenges by designing anodes through incorporating silicon with mixed electronic-ionic conductive (MEIC) hierarchically ordered structure (HOS) polymer binders. These multifunctional HOS polymer binders effectively preserve the structural integrity of electrode materials, even when silicon materials experiences significant volume expansion and shrinkage during the charging-discharging process. Owing to establishments of covalent bonds between silicon surface and the polymer binders, the resulting SSBs exhibited excellent resilience and only required hand-tightening force (<1 ton) for operation. These polymer binders effectively maintained continuous electronic and ionic pathways within silicon-based anodes without the need of additional additives, such as carbon material and solid-state electrolytes. Utilizing these versatile polymer binders, the resultant SSBs featured an outstanding cycling performance over 100 cycles in full cells, with an average Coulombic efficiency exceeding 97%. Reference A. Song, W. Zhang, H. Guo, L. Dong, T. Jin, C. Shen and K. Xie, Advanced Energy Materials , 13 , 2301464 (2023). W. Ping, C. Yang, Y. Bao, C. Wang, H. Xie, E. Hitz, J. Cheng, T. Li and L. Hu, Energy Storage Materials , 21 , 246 (2019). M. Rana, Y. Rudel, P. Heuer, E. Schlautmann, C. Rosenbach, M. Y. Ali, H. Wiggers, A. Bielefeld and W. G. Zeier, ACS Energy Letters , 8 , 3196 (2023). D. H. Tan, Y.-T. Chen, H. Yang, W. Bao, B. Sreenarayanan, J.-M. Doux, W. Li, B. Lu, S.-Y. Ham and B. Sayahpour, Science , 373 , 1494 (2021).

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

Tailoring Slurries Using Cosolvents and Li Salt Targeting Practical All‐Solid‐State Batteries Employing Sulfide Solid Electrolytes

Wet-slurry fabrication using PVdF-HFP binder with sulfide electrolytes via synergetic cosolvent approach for all-solid-state batteries

LiI-Doped Sulfide Solid Electrolyte: Enabling a High-Capacity Slurry-Cast Electrode by Low-Temperature Post-Sintering for Practical All-Solid-State Lithium Batteries

Toward the Practical and Scalable Fabrication of Sulfide‐Based All‐Solid‐State Batteries: Exploration of Slurry Process and Performance Enhancement Via the Addition of LiClO4

All -Solid-state Batteries with Slurry Coated LiNi0.8Co0.1Mn0.1O2 Composite Cathode and Li6PS5Cl Electrolyte: Effect of Binder Content

Phase-Transition-Promoted Interfacial Anchoring of Sulfide Solid Electrolyte Membranes for High-Performance All-Solid-State Lithium Battery

Long‐Life Sulfide All‐Solid‐State Battery Enabled by Substrate‐Modulated Dry‐Process Binder

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation

Thin and Flexible Solid Electrolyte Membranes with Ultrahigh Thermal Stability Derived from Solution-Processable Li Argyrodites for All-Solid-State Li-Ion Batteries

Coaxial Nanofiber Binders Integrating Thin and Robust Sulfide Solid Electrolytes for High‐Performance All‐Solid‐State Lithium Battery

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

In Situ Polymerization Inhibiting Electron Localization in Hybrid Electrolyte for Room‐Temperature Solid‐State Lithium Metal Batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Mixed Electronic-Ionic Conductive Polymer Binder for Silicon-Based Solid-State Battery

Stable Binder Boosting Sulfide Solid Electrolyte Thin Membrane for All-Solid-State Lithium Batteries

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination