Abstract:Regarding to the large‐scale fabrication of sulfide‐based all‐solid‐state batteries, the preparation of electrode slurry is a major challenge. The chemical and electrochemical compatibility of Li6PS5Cl, PVDF, and isobutyl isobutyrate is investigated for the electrode slurry process and the strategy of using LiClO4‐modified PVDF to facilitate interfacial Li+ transport for improving the cycling performance and rate performance of all‐solid‐state batteries is proposed. Sulfide‐based all‐solid‐state batteries (ASSBs) have a wide application prospect because of the advantages of higher energy density and better intrinsic safety over conventional lithium‐ion batteries (LIBs). The compatibility of sulfide‐based electrolytes with various organic solvents and the possibilities of the slurry coating process with these systems remain veiled that limits the large‐scale fabrication of sulfide‐based ASSBs. In this study, polyvinylidene fluoride (PVDF) binder and isobutyl isobutyrate (IBB) are selected as the combination of binder and solvent to achieve scalable slurry process after examining the chemical and electrochemical compatibility of Li6PS5Cl (LPSC) solid electrolyte, PVDF, and IBB. A comparative investigation of sheet‐type LiNi0.83Co0.11Mn0.06O2 (NCM811) electrodes and pellet‐type NCM811 electrodes shows that PVDF hinders the transport of Li+ and electron, but it benignantly works as a buffer layer, which alleviates the side reaction in the composite cathode electrode. Further, PVDF is modified by LiClO4 to facilitate interfacial Li+ transport, which improves the capacity retention of the cell at 0.5 C to 97.05% after 100 cycles. Finally, NCM811/graphite full‐cell is successfully fabricated by the slurry coating process, which demonstrates the feasibility of practical and scalable fabrication of sulfide‐based ASSBs with slurry process and its performance enhancement effect via LiClO4 modification.

LiI-Doped Sulfide Solid Electrolyte: Enabling a High-Capacity Slurry-Cast Electrode by Low-Temperature Post-Sintering for Practical All-Solid-State Lithium Batteries

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

Sulfide Solid Electrolyte Thin Film with High Ionic Conductive from Slurry-Casting Strategy for All-Solid-state Lithium Batteries

Toward the Practical and Scalable Fabrication of Sulfide‐Based All‐Solid‐State Batteries: Exploration of Slurry Process and Performance Enhancement Via the Addition of LiClO4

Solid-State Plastic Crystal Electrolytes: Effective Protection Interlayers For Sulfide-Based All-Solid-State Lithium Metal Batteries

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Size-controlled wet-chemical synthesis of sulfide superionic conductors for high-performance all-solid-state batteries

A robust solid electrolyte interphase enabled by solvate ionic liquid for high-performance sulfide-based all-solid-state lithium metal batteries

Styrene–Butadiene–Styrene Block Copolymer-Li5.5PS4.5Cl1.5 Composite Solid-State Electrolyte Enabling a High-Performance All-Solid-State Lithium Battery

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation

Functionalized Sulfide Solid Electrolyte with Air-Stable and Chemical-Resistant Oxysulfide Nanolayer for All-Solid-State Batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

Slurry-Coated LiNi0.8Co0.1Mn0.1O2-Li3InCl6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries.

The construction of multifunctional solid electrolyte interlayers for stabilizing Li6PS5Cl-based all-solid-state lithium metal batteries

Slurry-Coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 -Li 3 InCl 6 Composite Cathode with Enhanced Interfacial Stability for Sulfide-Based All-Solid-State Batteries

Boosting the Interfacial Stability of the Li6PS5Cl Electrolyte with a Li Anode via In Situ Formation of a LiF-Rich SEI Layer and a Ductile Sulfide Composite Solid Electrolyte

High Capacity And Superior Cyclic Performances Of All-Solid-State Lithium-Sulfur Batteries Enabled By A High-Conductivity Li10snp2s12 Solid Electrolyte

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Viability of all-solid-state lithium metal battery coupled with oxide solid-state electrolyte and high-capacity cathode

High-rate and durable sulfide-based all-solid-state lithium battery with in situ Li2O buffering