Abstract:All-solid-state batteries have become the most potential next-generation energy-storage devices. However, it is quite difficult to simultaneously achieve a single solid-state electrolytes (SSEs) layer with both dendrite-free Li metal plating and low interfacial resistance between the cathode and SSEs. Herein, an integrated structure of cathode and double-layer solid electrolyte membrane (IS-CDL) is designed, which greatly improves the interfacial contact and suppresses the Li dendrite growth. The first "polymer in ceramic" solid electrolyte layer (SL1) consists of 80 wt % Li1.4Al0.4Ti1.6(PO4)3 (LATP) nanoparticles and 20 wt % polyethylene oxide (PEO), and the second polymer electrolyte layer is PEO-based solid electrolyte layer (SL2). The SL1 with high mechanical properties can hinder the growth of Li dendrites and reduce the interfacial resistance with the cathode. The SL2 can inhibit the side reaction between the Li metal and LATP. The Li symmetric cells with sandwich-type hierarchical electrolyte (SL2/SL1/SL2) can stably cycle over 3200 h at 0.1 mA cm–2 at 45 °C. The obtained all-solid-state LiFePO4–IS-CDL/Li batteries present a capacity of 142.6 mA h g–1 at 45 °C with the capacity retention of 91.7% after 100 cycles, and all-solid-state NCM811–IS-CDL/Li batteries deliver a specific capacity of 175.5 mA h g–1 at 60 °C. This work proposes an effective strategy to fabricate all-solid-state lithium batteries with high electrochemical performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16390?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16390</a>.Preparation of high mass loading cathode; SEM image of pristine LATP nanoparticles; optical images of the solid electrolyte membrane; EIS spectra of Li/LFP–IS–CSL1 cells and Li/LFP–IS–CDL cells; impedance spectra of solid electrolyte membranes; digital photographs of the lithium metal surface; charge and discharge curves; voltage profile of a symmetric cell; and cycling performances, EIS spectra, and charge–discharge voltage profiles of NCM811 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16390/suppl_file/am0c16390_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries

High-Entropy Laminates with High Ion Conductivities for High-Power All-Solid-State Lithium Metal Batteries.

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

A high energy and power all-solid-state lithium battery enabled by modified sulfide electrolyte film

Fluorinated boron nitride nanosheet enhanced ultrathin and conductive polymer electrolyte for high‐rate solid‐state lithium metal batteries

A Self‐Limited Free‐Standing Sulfide Electrolyte Thin Film for All‐Solid‐State Lithium Metal Batteries

Long cycle life all-solid-state batteries enabled by solvent-free approach for sulfide solid electrolyte and cathode films

Bendable and Thin Sulfide Solid Electrolyte Film: A New Electrolyte Opportunity for Free-Standing and Stackable High-Energy All-Solid-State Lithium-Ion Batteries

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

Free-standing Sulfide/polymer Composite Solid Electrolyte Membranes with High Conductance for All-Solid-state Lithium Batteries

Thin Free-Standing Sulfide/Halide Bilayer Electrolytes for Solid-State Batteries Using Slurry Processing and Lamination

All-solid-state Lithium Battery with High Capacity Enabled by a New Way of Composite Cathode Design

Asymmetric double-layer composite electrolyte with enhanced ionic conductivity and interface stability for all-solid-state lithium metal batteries

12.6 μm-Thick Asymmetric Composite Electrolyte with Superior Interfacial Stability for Solid-State Lithium-Metal Batteries

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

A High Ion Conductive Solid Electrolyte Film and Interface Stabilization Strategy for Solid-state Li-S Battery

A high ionic conductive PDOL/LAGP composite solid electrolyte film for Interfacial Stable solid-state lithium batteries

Amphipathic Binder Integrating Ultrathin and Highly Ion‐Conductive Sulfide Membrane for Cell‐Level High‐Energy‐Density All‐Solid‐State Batteries

Enabling high-performance all-solid-state lithium batteries with high ionic conductive sulfide-based composite solid electrolyte and ex-situ artificial SEI film

Ultrathin Layered Double Hydroxide Nanosheets Enabling Composite Polymer Electrolyte for All‐Solid‐State Lithium Batteries at Room Temperature