Abstract:Development of solid-state batteries with a high voltage cathode and lithium metal anode could enable high energy density while avoiding safety issues of flammable liquid electrolytes. However, the solid electrolyte (SE) should meet multiple requirements, including 1) electrochemical stability at both the cathode and anode side interfaces, 2) small thickness (tens of μm) to maximize energy density of the cell, and 3) fabrication with a scalable manufacturing method. Using bilayer SEs with different electrochemical stability windows could enable stability at both cathode|SE and anode|SE interfaces. In this work, we developed a manufacturing process to fabricate thin (60 μm) free-standing bilayer SE films from slurry casting and lamination, which can be used for large scale manufacturing of SSBs. Halide SE (Li 3 InCl 6 ) and sulfide SE (Li 6 PS 5 Cl) were slurry casted on different substrates, and then were dried in vacuum before being laminated onto each other to make a free-standing bilayer film. The parallel slurry casting approach eliminates cross-compatibility requirements of the solvents used for slurry preparation. The resulting bilayer films after densification were pin-hole free without intermixing between the two phases. The ionic conductivity of the bilayer SE film was ~70% of the bilayer SE pellet (1 mm thickness in total) made with a conventional powder pressing method. However, because the thickness of bilayer SE film (60 μm) was much smaller than the bilayer SE pellet (1 mm), the bilayer SE film had ~10x lower area-specific resistance (ASR) compared to the bilayer SE pellet. Because of the lower total cell resistance, the cell made with the bilayer SE film had a better rate capability compared to the reference cell in pellet geometry. The strategy developed in this work could be integrated into current manufacturing infrastructure of battery fabrication as it is based on slurry casting, which is already a well-established fabrication method for lithium-ion batteries. Moreover, it could be used to fabricate multi-layered solid-state architectures in general, which are challenging to manufacture due to solvent compatibility issues during slurry casting. The study will assist the progress of solid-state battery manufacturing by providing a scalable manufacture method to prepare thin free-standing bilayer SEs.

Bendable and Thin Sulfide Solid Electrolyte Film: A New Electrolyte Opportunity for Free-Standing and Stackable High-Energy All-Solid-State Lithium-Ion Batteries

High Ionic Conductive, Mechanical Robust Sulfide Solid Electrolyte Films and Interface Design for All‐Solid‐State Lithium Metal Batteries

A Self‐Limited Free‐Standing Sulfide Electrolyte Thin Film for All‐Solid‐State Lithium Metal Batteries

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Ultra-thin free-standing sulfide solid electrolyte film for cell-level high energy density all-solid-state lithium batteries

Ultrathin, Flexible Polymer Electrolyte for Cost‐Effective Fabrication of All‐Solid‐State Lithium Metal Batteries

A Large‐Scale Fabrication of Flexible, Ultrathin, and Robust solid Electrolyte for Solid‐State Lithium‐Sulfur Batteries

Sulfide Solid Electrolyte Thin Film with High Ionic Conductive from Slurry-Casting Strategy for All-Solid-state Lithium Batteries

A facile path from fast synthesis of Li-argyrodite conductor to dry forming ultrathin electrolyte membrane for high-energy-density all-solid-state lithium batteries

A high energy and power all-solid-state lithium battery enabled by modified sulfide electrolyte film

High Energy Density Solid State Lithium Metal Batteries Enabled by Sub‐5 Μm Solid Polymer Electrolytes

Fabrication of 60μm-Thick Free-Standing Bilayer Solid Electrolytes for Solid-State Batteries Using Solution Processing and Lamination

Flexible Electrolyte and Cathode Membranes for All-Solid-State Batteries Fabricated by a One-Step Solvent Method

Amphipathic Binder Integrating Ultrathin and Highly Ion‐Conductive Sulfide Membrane for Cell‐Level High‐Energy‐Density All‐Solid‐State Batteries

Integrated design of ultrathin crosslinked network polymer electrolytes for flexible and stable all-solid-state lithium batteries

Design of thin solid-state electrolyte films for safe and energy-dense batteries

Cathode-Supported All-Solid-State Lithium–Sulfur Batteries with High Cell-Level Energy Density

Solid-State Plastic Crystal Electrolytes: Effective Protection Interlayers For Sulfide-Based All-Solid-State Lithium Metal Batteries

Free-standing Sulfide/polymer Composite Solid Electrolyte Membranes with High Conductance for All-Solid-state Lithium Batteries

Thin Free-Standing Sulfide/Halide Bilayer Electrolytes for Solid-State Batteries Using Slurry Processing and Lamination

Dendrite-Free Li5.5PS4.5Cl1.5-Based All-Solid-State Lithium Battery Enabled by Grain Boundary Electronic Insulation Strategy through In Situ Polymer Encapsulation