Abstract:Electric power distribution systems that link the bulk power grid (generation and transmission systems) to customers are the leading cause of power outages due to their vulnerability to extreme wind events, especially hurricanes. The strength of the wood poles that typically support the distribution lines also deteriorate over time. The vulnerability of the poles is expected to increase due to the potential impact of climate change on both hurricane hazard and wood decay rate. As such, an effective maintenance planning method is required for the vast number of poles supporting distribution lines. This paper presents a framework to optimize the maintenance of a network of wood utility poles. Corrective replacement due to failure caused by hurricanes and preventive replacement due to excessive decay are considered. The objective is to find the optimal inspection interval for the preventive replacement to minimize the long-term maintenance cost. To solve the optimization problem, the decay of the poles is modeled as a stationary gamma process. The impact of climate change on the rate of pole failure and replacement is also investigated. Two locations are considered as case studies: Miami, Florida, and New York City, New York. The period from 2010 to 2099 is considered for the study. The results of the case study show that the optimal inspection/replacement cycle determined using the developed framework results in lower total maintenance costs compared to current typical utility practice. Based on the inspection and replacement costs used in the study, the results show that adopting a periodic preventive maintenance policy decreases the failure rate of the poles but increases the total maintenance cost. However, only the cost of replacing the poles is considered here. Other considerations, such as indirect costs due to power outages and the impact of pole failure on system reliability, can render the adoption of a preventive replacement policy cost-effective. The results also show that climate change can increase the total maintenance cost. Based on current typical utility maintenance practice, climate change can increase the total maintenance cost by up to 8% in Miami and 6% in NYC, depending on the emission scenario considered.

Nondestructive bending tests on Douglas-fir utility poles as a potential tool for pole sorting and for prediction of their behavior in service

Modal Testing and Detection of Pretension Deviation in a Cable Dome Structure

Bending Strength and Stiffness of Portuguese Maritime Pine Utility Poles

Detection of Knot Defects on Coniferous Wood Surface Using Near Infrared Spectroscopy and Chemometrics

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

Condition Assessment of Foundation Piles and Utility Poles Based on Guided Wave Propagation Using a Network of Tactile Transducers and Support Vector Machines

Development of a Novel Lightweight Utility Pole Using a New Hybrid Reinforced Composite—Part 1: Fabrication and Experimental Investigation

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Measuring geo-grids stress using distributed fiber-optic sensors based on pulse-prepump-Brillouin optical time domain analysis

A novel identification method for obtaining bending moment–curvature relations of wood stems based on digital image correlation and SDOF analysis

Dynamic Method of Neutral Axis Position Determination and Damage Identification with Distributed Long-Gauge FBG Sensors

Robust Planning of Test Poles for Grounding Grids Corrosion Diagnosis

Reuse of wooden utility poles through the combination of new and old elements

Evaluating the Behavior of Anchor Rod Foundations for High-Mast Light Poles Using Nonlinear Finite-Element Analysis

Probabilistic framework for assessing the vulnerability of power distribution infrastructures under extreme wind conditions

New four-point bending test protocol for the strength grading of timber: relationship between local and global modulus of elasticity (MOE) of maritime pine

Optimization of Condition-Based Maintenance of Wood Utility Pole Network Subjected to Hurricane Hazard and Climate Change

Foundation Stability of Wood-Pole H-Frame Structures for Transmission Lines [includes discussion]

An efficient nonlinear method for cascading failure analysis and reliability assessment of power distribution lines under wind hazard

Experimental investigation on the dowel-bearing properties of neosinocalamus affinis-based bamboo scrimber

Insight to Enhancing the Performance of the Pole Drop Test for Detecting Field Winding Turn Faults in Salient Pole Synchronous Motors