Abstract:The maritime pine (Pinus pinaster Ait.) forest is an essential element of the Portuguese forest landscape due to its social, economic, and environmental importance. The sustainability of these forests in the Mediterranean region faces challenges due to recurrent forest fires and the absence of or delayed management. The species has a high capacity for regeneration, but the perpetuation of pine forests in sustainable conditions depends on adequate management to achieve high biomass production and assure fire resilience. This study aimed to analyse four management scenarios (C1 to C4) for the natural regeneration of maritime pine in six areas with stand ages ranging from 6 to 16 years and densities varying from 15,000 to circa 93,000 trees per ha. The same four scenarios were implemented in each of the six areas. The scenarios considered the evolution of forest growth according to different management prescriptions and were simulated using Modispinaster and PiroPinus models. Scenario C1 considered no intervention, with only the final cut. Scenario C2 considered a thinning schedule to maintain the stand within the 50–60% range of the Stand Density Index (SDI). Scenario C3 followed the area's Forest Management Plan (PGF), which typically includes two or three thinning operations throughout the cycle. Scenario C4 was adapted from the MS1 silvicultural model of the National Institute for Nature Conservation and Forests—ICNF, which involves opening strips at earlier ages (3 and 6 years), with the selection of trees to remain in the wooded area carried out between 4 and 10 years of age and performing thinning whenever the Wilson Spacing Factor (FW) reaches 0.21. The final cutting age was assumed to be 45 years but could be lowered to 35 years in Scenario 3 if defined in the plan. Based on the indicators generated by the simulators, the results showed variations in the total volume of timber produced at the time of harvest depending on the silvicultural guidelines. Scenario C4 was the most effective in generating the highest individual tree volume at the end of the cycle and the total volume of timber collected throughout the cycle. The ability of the forest to resist fire was evaluated before and after the first treatment for density reduction. The treatments performed did not decrease the resistance to fire control.

Bending Strength and Stiffness of Portuguese Maritime Pine Utility Poles

Reuse of wooden utility poles through the combination of new and old elements

Assessment of Bending Properties of Sawn and Glulam Blackwood in Portugal

New four-point bending test protocol for the strength grading of timber: relationship between local and global modulus of elasticity (MOE) of maritime pine

An investigation into the flexural properties of sawn timber and poles of South African grown Pinus maximinoi (H.E.Moore)

Nondestructive bending tests on Douglas-fir utility poles as a potential tool for pole sorting and for prediction of their behavior in service

Bending Performance of Nail-Laminated Bamboo-Timber Panels Made with Glubam and Fast-Grown Plantation Chinese Fir

On the identification of earlywood and latewood radial elastic modulus of Pinus pinaster by digital image correlation: A parametric analysis

Particle image velocimetry technique and ultrasound method to obtain the modulus of elasticity of Bertholletia excelsa wood

Influence of Test Method on the Determination of Tensile Strength Perpendicular to Grain of Timber for Civil Construction

Physical, chemical and mechanical wood properties of Pinus nigra growing in Portugal

Influence of test methodology on the characterization of the parallel-to-grain timber embedment strength and foundation modulus of dowels

Experimental study on bending mechanical properties of moso bamboo

Relationship between characteristic values of shear strength parallel to grain and tensile strength perpendicular to grain for tropical woods

APPARENT DENSITY AS AN ESTIMATOR OF WOOD PROPERTIES OBTAINED IN TESTS WHERE FAILURE IS FRAGILE

Static Analysis of Wooden Beams Strengthened with FRCM-PBO Composite in Bending

OPPORTUNITIES OF IMPROVING HARVESTING TECHNOLOGIES FOR WIDER USE OF SCOTS PINE (PINUS SYLVESTRIS L.) IN CONSTRUCTION ELEMENTS

Comparison between static modulus of elasticity, non-destructive testing moduli of elasticity and stress-wave speed in white spruce and lodgepole pine wood

Comparative Study on Complete Characterisation of Elastic–Ductile Compressive Behaviour of Aged and New Norway Spruce Timber

The Influence of Age on the Wood Properties of Paulownia tomentosa (Thunb.) Steud.

Enhancing Sustainability and Yield in Maritime Pine Forests: Evaluating Silvicultural Models for Natural Regeneration