Abstract:This work aims at the separation of n -butanol from aqueous solutions by means of pervaporation using membranes based on gelled ionic liquids (IL). These membranes were mechanically stabilized with a double silicone coating using two polydimethylsiloxane (PDMS) films. The first step of the membrane preparation considered the formation of a gelled ionic liquid layer, which was formed using two different imidazolium-based ionic liquids: [omim][Tf 2 N] and [bmim][Tf 2 N], and two different phosphonium-based ionic liquids: [P 6,6,6,14 ][Tf 2 N] and [P 6,6,6,14 ][DCA]. The gelation procedure was carried out on a porous paper support using a low molecular weight gelator. The membranes obtained from this method were tested in pervaporation assays to separate butanol from model ABE (Acetone–Butanol–Ethanol) fermentation solutions. These assays were done in an experimental setup especially built for this purpose. The pervaporation performance of these ionic liquid-based membranes was compared to that obtained with a single PDMS layer membrane. From these experimental results, butanol/water selectivity for [P 6,6,6,14 ][Tf 2 N]-based membranes reached a value equal to 892, which is 150 times higher than the value obtained for a single PDMS layer membrane. Simultaneously, for the same IL, the transmembrane fluxes (kg h −1 m −2 ) of butanol and water were 37% and 99.6% lower than the values obtained using a single PDMS layer membrane, respectively. The hydrophobic character of the selected ionic liquid and its relatively high values for the transport parameters can explain this experimental response.

Separation of benzene—n-heptane mixtures by pervaporation with elastomeric membranes. I. Performance of membranes

Separation of benzene—n-heptane mixtures by pervaporation with elastomeric membranes. II. Contribution of sorption to the separation mechanism

A study on separation of organics by pervaporation

Pervaporation for Separating Benzene/cyclohexane Mixture by P(AA-MA) Copolymer Membranes

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Study on Swelling Behavior and Pervaporation Properties of AA–MMA–BA Copolymers for Separation of Methanol/mtbe/c5 Mixtures

Pervaporation of methanol/MTBE/C5 ternary mixtures through the CA membrane

Divinyl Benzene Cross-Linked Htpb-Based Polyurethaneurea Membranes for Separation of P-/O-Xylene Mixtures by Pervaporation

Micro-Phase Separation Structure PU Membranes for Pervaporation of n-Butanol/Water Mixtures

Pervaporation Performance of Polydimethylsiloxane Membranes for Separation of Benzene/cyclohexane Mixtures

Preparation and Pervaporation Performances of PEA‐based Polyurethaneurea and Polyurethaneimide Membranes to Benzene/Cyclohexane Mixture

Pervaporation of Benzene/cyclohexane Mixtures Through Rhodium-Loaded Β-Zeolite-filled Polyvinyl Chloride Hybrid Membranes

Preparation and Pervaporation Performance of Partly Hydrolyzed Poly(vinyl Acetate) Membranes for Separating Benzene/Cyclohexane Mixtures

Pervaporation Recovery of Acetone-Butanol from Aqueous Solution and Fermentation Broth Using Htpb-Based Polyurethaneurea Membranes

Pervaporation Separation of p-/o-xylene mixtures using HTPB-Based Polyurethaneurea membranes

Separation of methanol–benzene and methanol–toluene mixtures by pervaporation: effects of thermodynamics and structural phenomenon

I&Ec 104-Preparation And Pervaporation Performances Of Pea-Based Polyurethaneimide (Pui) Membranes To Benzene/Cyclohexane Mixture

Performance of butanol separation from ABE mixtures by pervaporation using silicone-coated ionic liquid gel membranes

Preparation of PEA-Based Polyurethane Membranes and Their Pervaporation Performances to Benzene/Cyclohexane Mixture

Zif-8 Filled Polydimethylsiloxane Membranes for Pervaporative Separation of N-Butanol from Aqueous Solution