Abstract:Polyurethane (PU) is a kind of promising pervaporation membrane material and silica-rich zeolite is a potential modifier to PU, but the pristine zeolite particles suffer from the bad dispersion in the polymer. This work presents a new route to modify zeolite (ZSM-5) particles via bridging with isocyanate to prepare a membrane for the recovery of phenol from the water. Zeolite ZSM-5 particles were successfully grafted by TDI, β-cyclodextrin, and oleyl alcohol, consecutively. The corresponding zeolites filled PU membranes were prepared and characterized by FTIR, TGA and SEM techniques. The effects of the grafted structures on the pervaporation performances of the zeolites/PU membranes were investigated in the recovery of phenol from the water. The results showed that the modified ZSM-5 particles had a good dispersion in PU, while the pristine ones demonstrated an obvious sedimentation. The modified zeolite/polyurethane membranes achieved better comprehensive separation performance than the neat PU and pristine ZSM-5 modified PU membranes. Depending on the good affinity of the β-cyclodextrin to phenol, ZSM-5 particles grafted by toluene diisocyanate and β-cyclodextrin (ZSM-TC) showed the optimal separation performance with the flux of 46.03 kg μm m−2 h−1 and the separation factor of 15.64 for the 0.3 wt% aqueous phenol solution at 80 °C. With the increase in the zeolite loading from 5 to 25%, ZSM-5/PU membrane showed the decreased separation factor and flux comparing to the neat PU. However, ZSM-TC/PU membrane showed higher flux and better selectivity than the neat PU and pristine ZSM-5 filled PU membranes.

Pervaporation of Benzene/cyclohexane Mixtures Through Rhodium-Loaded Β-Zeolite-filled Polyvinyl Chloride Hybrid Membranes

PVA Membrane Filled Β-Cyclodextrin for Separation of Isomeric Xylenes by Pervaporation

Pervaporation Separation of Xylene Isomers by Hybrid Membranes of Paas Filled with Si Lane-Modified Zeolite

Pervaporation for Separating Benzene/cyclohexane Mixture by P(AA-MA) Copolymer Membranes

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Preparation and Pervaporation Performance of Partly Hydrolyzed Poly(vinyl Acetate) Membranes for Separating Benzene/Cyclohexane Mixtures

Pervaporation Performance of Polydimethylsiloxane Membranes for Separation of Benzene/cyclohexane Mixtures

Divinyl Benzene Cross-Linked Htpb-Based Polyurethaneurea Membranes for Separation of P-/O-Xylene Mixtures by Pervaporation

Pervaporation Separation of p-/o-xylene mixtures using HTPB-Based Polyurethaneurea membranes

Separation of Benzene/cyclohexane by Pervaporation Through Chelate Poly(vinyl Alcohol)/poly(allyl Amine) Blend Membrane

Separation of benzene—n-heptane mixtures by pervaporation with elastomeric membranes. I. Performance of membranes

MFI-Type Zeolite Membranes for Pervaporation Separation of Dichlorobenzene Isomers

Pervaporation of Ethanol/Water Mixtures with High Flux by Zeolite-Filled Pdms/Pvdf Composite Membranes

Preparation and Pervaporation Performances of PEA‐based Polyurethaneurea and Polyurethaneimide Membranes to Benzene/Cyclohexane Mixture

I&Ec 104-Preparation And Pervaporation Performances Of Pea-Based Polyurethaneimide (Pui) Membranes To Benzene/Cyclohexane Mixture

Pervaporation performance of surface-modified zeolite/PU mixed matrix membranes for separation of phenol from water

Compatibility of PVC/EVA Blends and the Pervaporation of Their Blend Membranes for Benzene/cyclohexane Mixtures

Preparation of PEA-Based Polyurethane Membranes and Their Pervaporation Performances to Benzene/Cyclohexane Mixture

Pervaporation Behavior of PVA Membrane Containing Β‐cyclodextrin for Separating Xylene Isomeric Mixtures

Threading MOF Membranes with Polymer Chains for Superior Benzene/Cyclohexane Separation

Separation of benzene—n-heptane mixtures by pervaporation with elastomeric membranes. II. Contribution of sorption to the separation mechanism