Abstract:High density polyethylene (HDPE)/polyethylene-block-poly(ethylene glycol) (PE-b-PEG) blend porous membranes were prepared via thermally induced phase separation (TIPS) process using diphenyl ether (DPE) as diluent. The phase diagrams of HDPE/PE-b-PEG/DPE systems were determined by optical microscopy and differential scanning calorimetry (DSC). By varying the content of PE-b-PEG, the effects of PE-b-PEG copolymer on morphology and crystalline structure of membranes were studied by scanning electron microscopy (SEM) and wide angle X-ray diffraction (WAXD). The chemical compositions of whole membranes and surface layers were characterized by elementary analysis, Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS). Water contact angle, static protein adsorption and water flux experiments were used to evaluate the hydrophilicity, antifouling and water permeation properties of the membranes. It was found that the addition of PE-b-PEG increased the pore size of the obtained blend membranes. In the investigated range of PE-b-PEG content, the PEG blocks could not aggregate into obviously separated domains in membrane matrix. More importantly, PE-b-PEG could not only be retained stably in the membrane matrix during membrane formation, but also enrich at the membrane surface layer. Such stability and surface enrichment of PE-b-PEG endowed the blend membranes with improved hydrophilicity, protein absorption resistance and water permeation properties, which would be substantially beneficial to HDPE membranes for water treatment application.

Preparation of PEA-Based Polyurethane Membranes and Their Pervaporation Performances to Benzene/Cyclohexane Mixture

Preparation and Pervaporation Performances of PEA‐based Polyurethaneurea and Polyurethaneimide Membranes to Benzene/Cyclohexane Mixture

I&Ec 104-Preparation And Pervaporation Performances Of Pea-Based Polyurethaneimide (Pui) Membranes To Benzene/Cyclohexane Mixture

Preparation of polyurethaneurea and polyurethaneimide membranes and their pervaporation performances to aromatic/aliphatic hydrocarbon mixtures

A study on separation of organics by pervaporation

Synthesis, characterization of polyurethaneimide and pervaporation performances to benzene/cyclohexane

Preparation of High Density Polyethylene/polyethylene- Block -Poly(ethylene Glycol) Copolymer Blend Porous Membranes Via Thermally Induced Phase Separation Process and Their Properties

Divinyl Benzene Cross-Linked Htpb-Based Polyurethaneurea Membranes for Separation of P-/O-Xylene Mixtures by Pervaporation

P(Vdf-Co-Hfp) Membrane for Recovery of Aroma Compounds from Aqueous Solutions by Pervaporation - I. Ethyl Acetate/Water System

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

Pervaporation Separation of p-/o-xylene mixtures using HTPB-Based Polyurethaneurea membranes

Study on Pervaporation Membranes for Removing Methanol from C 5 or Methyl Tert-butyl Ether Mixtures

Pervaporation Performance of Polydimethylsiloxane Membranes for Separation of Benzene/cyclohexane Mixtures

Preparation and Pervaporation Performance of Partly Hydrolyzed Poly(vinyl Acetate) Membranes for Separating Benzene/Cyclohexane Mixtures

Cross-Linked Htpb-Based Polyurethaneurea Membranes for Recovery of Ethyl Acetate from Aqueous Solution by Pervaporation

Waterborne Polyurethane/poly(vinyl Alcohol) Membranes: Preparation, Characterization, and Potential Application for Pervaporation

Preparation of Modified Polyurethane Membranes and Their Pervaporation Performances to Benzene/Cyclohexane Mixture

Pervaporation for Separating Benzene/cyclohexane Mixture by P(AA-MA) Copolymer Membranes

PERVAPORATION SEPARATION FOR TOLUENE/n-HEPTANE MIXTURE BY POLYIMIDE MEMBRANES CONTAINING FLUORINE

Synthesis of novel membranes of polyimide with side-chains and their pervaporation performance

Micro-Phase Separation Structure PU Membranes for Pervaporation of n-Butanol/Water Mixtures