Abstract:Improving the physical and mechanical properties such as hardness and strength of metal thin films can be achieved by incorporating nanoparticles into the pure metals, for example via electrocodeposition. However, the agglomeration of nanoparticles during electrocodeposition of nanocomposite thin films is an unresolved issue. This paper presents the preliminary results of electrocodeposition thin nanocomposite films under different processing conditions. The microstructure and distribution of Al2O3 nanoparticles in electrocodeposited Cu matrix nanocomposite thin films on a pure Al plate were examined. In addition, the effect of electrolyte concentration on the agglomeration of nanoparticles was studied. Different stirring times were used for electrodepositing the alumina/Cu nanocomposite and the pure Cu control film. Under the constant stirring condition, different deposition times including 1, 4, 8, 12, and 24 hours were taken to study the differences between the agglomeration states of the alumina nanoparticles with the time change. We also examined the effect of turning the electromagnetic stirrer ON and OFF at different time intervals from as short as every 20 minutes to as long as ON and OFF every 2 hours on the nanoparticle agglomeration in the film Optical and electron microscopic studies were made to reveal the microstructure of the nanocomposite. It is found that there is no significant difference in microstructures for the specimens that made under either intermittent stirring or constant stirring for the same length of time.

Metallic Glass Nano-composite Thin Films for High-performance Functional Applications

Structure and Properties of Electrocodeposited Cu-Al2o3 Nanocomposite Thin Films

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

Microstructural, thermal and mechanical behavior of co-sputtered binary Zr–Cu thin film metallic glasses

Outstanding strength and conductivity of metallic glass composites with multiscale configuration

Heterogeneous metallic glass composites with a unique combination of strength, plasticity and conductivity

Microstructure and mechanical properties of nano dual-phase TiCuNi metallic glass films achieved by modulating magnetron sputtering temperature

Novel class of nanostructured metallic glass films with superior and tunable mechanical properties

Amorphous Zr-Cu thin-film alloys with metallic glass behavior

Multi-functional Amorphous/crystalline Interfaces Rendering Strong-and-ductile Nano-Metallic-glass/aluminum Composite

Formation and Properties of ZrO2–Cu Composite Nanoglass Films

High strength conductive bulk Cu-based alloy/metallic glass composites fabricated by spark plasma sintering

Comparison of the Resistivities of Nanostructured Films Made from Silver, Copper-Silver and Copper Nanoparticle and Nanowire Suspensions

Fabrication of Cu Rich Bulk Metallic Glass Composites Via Solidification Method

Formation of Fe-based Metallic Glass Coating Films Produced by High Velocity Oxy-fuel Spraying Process and their Applications

Fabrication, Corrosion, And Mechanical Properties Of Magnetron Sputtered Cu-Zr-Al Metallic Glass Thin Film

The Effect of Cu:Ag Atomic Ratio on the Properties of Sputtered Cu–Ag Alloy Thin Films

High-temperature malleable Ta-Co metallic glass developed by combinatorial method

Copper Thin Film Deposition by An Indigenous Unbalanced Type DC Magnetron Sputtering System

Fabrication and Mechanical Properties of Cu‐Based Bulk Metallic Glass and Composites

Cu Particulates Dispersed Bulk Metallic Glass Composites with High Strength and High Electrical Conductivity Fabricated by Spark Plasma Sintering