Abstract:It is well known that an increase in the compressive strength of cementitious composites is usually accompanied by a loss of tensile ductility. Designing and developing ultra-high-strength cementitious composites (e.g., ≥200 MPa) with high tensile strain capacity (e.g., ≥3%) and excellent crack resistance (e.g., crack width ≤100 μm) remain challenging. In this study, a series of ultra-high-strength Engineered Cementitious Composites (UHS-ECC) with a compressive strength over 210 MPa, a tensile strain capacity of 3–6% (i.e., 300–600 times that of ordinary concrete), and a fine crack width of 67–81 μm (at the ultimate tensile strain) were achieved. Hybrid design of fiber reinforcement and matrix for UHS-ECC was adopted by combining the ECC and ultra-high-performance concrete (UHPC) design concepts, and the effect of fiber hybridization and aspect ratio on the mechanical behavior of UHS-ECC was comprehensively investigated. The overall performance of UHS-ECC was assessed and compared with the existing high-strength ECC and strain-hardening UHPC, and it was found that the currently designed UHS-ECC recorded the best overall performance among the existing materials. Finally, the multiple cracking behavior of UHS-ECC was analyzed and modeled based on a probabilistic approach to evaluate its critical tensile strain for durability control in practical applications. The results of this study have pushed the performance envelope of both ECC and UHPC materials and provided a basis for developing cementitious composites with simultaneously ultra-high compressive strength, ultra-high tensile ductility, and excellent crack resistance.

Engineered/strain-hardening cementitious composites (ECC/SHCC) with an ultra-high compressive strength over 210 MPa

Ultra-high-strength engineered/strain-hardening cementitious composites (ECC/SHCC): Material design and effect of fiber hybridization

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

Development of ultrahigh-strength ultrahigh-toughness cementitious composites (UHS-UHTCC) using polyethylene and steel fibers

A Special Cementitious Material With Ultra-High Tensile Strain Capacity

A strain-hardening cementitious composites with the tensile capacity up to 8%

Tensile over-saturated cracking of ultra-high-strength engineered cementitious composites (UHS-ECC) with artificial geopolymer aggregates

Uniaxial Tensile Experiments of Ultra-High Toughness Cementitious Composite

Uniaxial Compressive Properties of Ultra High Toughness Cementitious Composite

High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling

Mechanical Properties and Carbonation Durability of Engineered Cementitious Composites Reinforced by Polypropylene and Hydrophilic Polyvinyl Alcohol Fibers

An Economical Ultra-High Ductile Engineered Cementitious Composite with Large Amount of Coarse River Sand

The Apparent Density, Tensile Properties and Drying Shrinkage of Ultra High Toughness Cementitious Composites

A review on the development of research and application of ultra high toughness cementitious composites

Basic Mechanical Properties of Ultra-High Ductility Cementitious Composites: from 40 MPa to 120 MPa

Seawater sea-sand Engineered Cementitious Composites (SS-ECC) for marine and coastal applications

Investigation on Triaxial Compressive Mechanical Properties of Ultra High Toughness Cementitious Composites with High Strain Capacity

Characteristics of High Ductility and Low Shrinkage Engineered Cementitious Composite and Its Applications

Ultra-low carbon lightweight engineered cementitious composite: Design and material characterization

Dynamic tensile properties of steel fiber reinforced polyethylene fiber-engineered/strain-hardening cementitious composites (PE-ECC/SHCC) at high strain rate

Engineered Cementitious Composites Using Chinese Local Ingredients: Material Preparation and Numerical Investigation