Abstract:In order to study the mechanical properties of seawater sea sand concrete and the durability damage law of seawater sea sand concrete under the action of seawater erosion, corresponding specimens were prepared and subjected to cube compressive strength, flexural strength, and dry-wet cycle tests by taking the volume dosage of glass fibers and polyvinyl alcohol fibers as variables. The test combined SEM scanning and EDS to analyze the microstructure of fiber-reinforced seawater sand concrete, and established a model based on the two-parameter Weibull probability distribution. The results show that the fiber has a significant effect on improving the mechanical properties and erosion resistance of seawater sand concrete. When the total volume content is 0.3% and the mixing ratio is 1:1, the improvement effect is the best. The maximum increase in cubic compressive strength was 24.2%; the maximum increase in flexural strength was 38.8%. After the specimens were subjected to wet and dry cycles for 360d, the maximum reduction in mass loss rate was 41.23%; the maximum reduction in strength loss rate was 27.55%. As observed from the microscopic images, the main disadvantage of SSC is that the salt crystallization and swelling matter produced by the erosion ions will weaken the bond between aggregate and mortar, resulting in defects in the interfacial transition zone (ITZ). Under the action of dry-wet cycles, the alternating dry-wet forces, the expansion pressure generated by expansive substances and the crystallization pressure generated by salt crystallization will change the microstructure, and therefore the damage of the specimen will deepen with the extension of erosion time. The microscopic images also show that the doping fibers can improve the internal integrity and compactness of the matrix, thus significantly improving the mechanical properties and durability of seawater sea sand concrete. In this test, a damage model was established based on the two-parameter Weibull distribution model, and the damage law between strength loss and dry-wet cycles was fitted, which provides a favorable basis to study the damage of seawater sea sand concrete under wet-dry cycling.

Seawater sea-sand Engineered Cementitious Composites (SS-ECC) for marine and coastal applications

High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling

Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics

Preparation and Mechanical Characterization of Cost-Effective Low-Carbon Engineered Cementitious Composites with Seawater and Sea-Sand

Mechanical properties and crack width control of seawater coral sand ECC

Seawater Sea-Sand Engineered Geopolymer Composites (EGC) with High Strength and High Ductility

Enhancing Mechanical Performance and Crack Morphology of Engineered Cementitious Composites Through Tailoring Coral Sand

Experimental Study on the Mechanical Properties and Uniaxial Compressive Constitutive Relationship of Sea Sand Coral Concrete

High ductility cementitious composites incorporating seawater and coral sand (SCS-HDCC) for offshore engineering: Microstructure, mechanical performance and sustainability

Research on the performance of seawater sea-sand concrete: A review

Enhanced Ductility and Toughness of Desert Sand Engineered Cementitious Composites

Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete

Quantitative Characterization of Multiple Cracks and Permeability in Coral Sand Engineered Cementitious Composites Based on Micro-Computed Tomography

An Economical Ultra-High Ductile Engineered Cementitious Composite with Large Amount of Coarse River Sand

Experimental Study on Toughness of Engineered Cementitious Composites with Desert Sand

Effects of Cyclic Seawater Exposure on the Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete

Strength, hydration, and microstructure of seawater sea-sand concrete using high-ferrite Portland cement

Development of Low-Carbon Sea Sand Engineered Cementitious Composites (lseccs): Performance, Cracking Behavior and Trilinear Tensile Constitutive Model

Study on mechanical properties and anti-erosion performance of fiber reinforced seawater sea sand concrete

Mechanical Performance and Chloride Penetration of Calcium Sulfoaluminate Concrete in Marine Tidal Zone

A review on ultra-high performance seawater sea sand concrete: Hydration, microstructure and properties