Abstract:Little data are available on the tensile behavior of concrete after elevated temperature exposure due to the difficulty of testing concrete in tension. Thus, we proposed a static expansion tensile method, in which a soundless (or silent) chemical demolition agent (SCDA) was used, to perform a static tension experiment on elevated concretes. Before the tests, concretes were exposed to four elevated temperatures (200, 400, 600, and 800 °C) and three heating periods (2, 3, and 4 h). Immediately after the heat treatments, static expansion tension tests were performed to analyze concretes' physical and acoustic emission (AE) signal characteristics changes under different temperature conditions. The test results showed that the changes of surface features of concrete after being treated at high temperatures are related to the physical properties. With the exposure temperature and duration increase, the acoustic velocity of concrete decreases while the porosity increases. The AE signals were changed sharply throughout the loading process until the specimens were completely damaged. With the increase in temperature, the maximum energy of the AE signal had a downward trend; the maximum amplitude had a trend that kept stable first and then started to decrease; the trend of the b -value primarily remained stable and then reached a peak, finally decreasing abruptly. The constitutive behavior analysis of concrete found that the Continuous Caps Model (CSCM) agreed well with the concrete's failure process. This study will provide basic information for the theoretical and engineering analysis of concrete structures after exposure to high temperatures, especially for the structural stability analysis after a fire.

Evolution of mechanical properties of concrete with temperature and humidity at high temperatures

Experimental study on dynamic behavior of concrete at elevated temperatures

Experimental Investigation of the Static Expansion Tensile Behavior of Concrete after Exposure to Elevated Temperatures

Effect of Temperature on Pore Structure and Strength of Concrete

Effect of Elevated Temperatures on Compressive Strength of Concrete

Variation Pattern of the Elastic Modulus of Concrete under Combined Humidity and Heat Conditions

Investigation on Concrete-Pcm Interface under Elevated Temperature: at Material Level and Member Level

Effects of Moisture on Properties of Concrete Exposed to Elevated Temperature

Variation of wave velocity and thermal conductivity of concrete after high-temperature treatment

Effects of water and temperature variations on deformation of limestone aggregates, cement paste, mortar and High Performance Concrete (HPC)

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Fracture Properties of Concrete in Dry Environments with Different Curing Temperatures

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Dynamic Tensile Properties of Concrete under Different Environments

Dynamic Tensile Properties and Energy Dissipation of High-Strength Concrete after Exposure to Elevated Temperatures

The effects of high temperature on compressive and flexural strengths of ordinary and high-performance concrete

Intrinsic Permeability Evolution in High Temperature Concrete: An Experimental and Numerical Analysis

CONSTITUTIVE MODEL OF HIGTH STRENGTH CONCRETE BEHAVIOUR AT HIGTH TEMPERATURES

Evaluation of Mechanical Properties of Concrete after Exposure to Elevated Temperatures Using Ultrasonic Pulse Velocity Measurement and a Split-Hopkinson Pressure Bar

Microstructural modeling of moisture-thermal and mechanical behavior within concrete during drying at elevated temperatures

Heat and Mass Transfers in a Heated Concrete Element: 20 to 600°C