Abstract:Different pitch parameters of the tool can lead to the changes in the delay of the machining system. A mechanical model of the variable pitch tool is developed by taking the regenerative chatter into account in the machining system with multiple delays. The dynamic differential equations with multiple delays are studied based on the fully discrete method; the Gaussian integral method is used to approximate the state item of the vibration response in the discrete interval, and the periodic and the delay items are linearly approximated to determine the transition matrix of the discrete state in the multiple delays period. The relationship between cutting force coefficients and cutting parameters is defined based on the size effect of the tool-workpiece contact area; a nonlinear model of the cutting force coefficients is presented by the cutting force detection experiment of aluminum alloy milling with the variable pitch tool. The state transition matrix of the multiple delays system is obtained by combining the Gauss full discrete method with the nonlinear cutting force coefficients, and then the effectiveness of the proposed method is verified by analyzing the convergence degree of the eigenvalue of state transition matrix. At the same time, the relationship between cutting parameters and the stability critical of the machining system is analyzed to draw the three-dimensional stability lobe diagram, which makes it clear that the limiting cutting depth of the tool increases about 2–3 times as the cutting width decreases. Combining with a cutting stability experiment of the variable pitch tool, it is verified that the dynamic model with the nonlinear dynamic parameters has higher prediction accuracy of the cutting stability than others. And it is observed that the eigenvalue of changes of the dynamic model is more violently in the low speed region (2000–4000 rpm), which indicates that the stability of the processing system is more sensitive to the cutting depth under the low speed condition, and the vibration reduction performance of variable pitch tools is more significant.

Effect of state-dependent time delay on dynamics of trimming of thin-walled structures

Bifurcation analysis of thin-walled structures trimming process with state-dependent time delay

Regenerative Effects of Orthogonal Chip Dimensions on Turning Stability of Thin-Wall Workpiece-Tool Coupled Dynamics

Prediction of Time-Varying Chatter Stability: Effect of Tool Wear

Modeling of variable-pitch/helix milling system considering axially varying dynamics with cutter runout offset and tilt effects

Investigation on chatter stability of thin-walled parts milling considering the effects of fixture support force and tool position

Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect

Modelling of Regenerative and Frictional Cutting Dynamics

A State-of-the-Art Review on Chatter Stability in Machining Thin−Walled Parts

Finite Strip Dynamic Modeling of Thin-Walled Aircraft Parts

Modeling and analysis for time-varying dynamics of thin-walled workpieces in mirror milling considering material removal

Study the effect of anti-vibration edge length on process stability of milling thin-walled Ti-6Al-4V alloy

Chatter Stability Prediction for Deep-Cavity Turning of a Bent-Blade Cutter

Stability for multiple delays machining system with variable pitch tools considering nonlinear cutting force coefficients

Stability Analysis and Test for Cutting Chatter of a Slender Shaft

Modeling, Analysis, and Removal of Chatter Marks in Flexible Turning

An improved time-varying stability analysis of micro milling considering tool wear

Effect of cutting vibration on the surface quality of commercially pure titanium (TA2) based on rotor dynamics model analysis

Time-varying dynamics updating method for chatter prediction in thin-walled part milling process

Cutting conditions dependent adjustment of dynamic responses for slender tools in internal turning with a flexible vibration suppression device

Chatter suppression analysis for variable pitch cutter in milling