Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

Stability analysis of thin-walled parts end milling considering cutting depth regeneration effect

Milling Error Prediction of Thin-Walled Parts During High-Speed Machining

Finite Element Simulation and Analysis of Deformation in Machining of Aeronautical Aluminum Alloy Thin-Walled Workpiece

Numerical Simulation and Analysis of Symmetry and Step-symmetry Milling of Aerospace Thin-walled Workpiece

Investigation on chatter stability of thin-walled parts milling considering the effects of fixture support force and tool position

Study the effect of anti-vibration edge length on process stability of milling thin-walled Ti-6Al-4V alloy

Regenerative Effects of Orthogonal Chip Dimensions on Turning Stability of Thin-Wall Workpiece-Tool Coupled Dynamics

Wall thickness error prediction and compensation in end milling of thin-plate parts

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Finite Strip Dynamic Modeling of Thin-Walled Aircraft Parts

A State-of-the-Art Review on Chatter Stability in Machining Thin−Walled Parts

Stability Analysis of Milling Based on the Barycentric Rational Interpolation Differential Quadrature Method

Stability Research Considering Non-Linear Change in the Machining of Titanium Thin-Walled Parts

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Dynamics and Stability of Milling Thin Walled Pocket Structure

Prediction of Chatter Considering the Effect of Axial Cutting Depth on Cutting Force Coefficients in End Milling

Chatter Stability Prediction of Ball-End Milling Considering Multi-Mode Regenerations

A new solution for stability prediction in flexible part milling