Abstract:Purpose This study aims to further refine the model, explore the influence of cutting parameters on the machining process, and apply it to practical engineering to improve the efficiency and quality of titanium alloy machining. Design/methodology/approach This paper establishes a comprehensive thermo-mechanical fully coupled orthogonal cutting model. This paper aims to couple the modified Johnson–Cook constitutive model, damage model and contact model to construct a two-dimensional orthogonal cutting thermo-mechanical coupling model for high-speed cutting of Ti6Al4V. The model considers the evolution of microstructures such as plastic deformation, grain dislocation rearrangement, dynamic recrystallization, as well as stress softening and hardening occurring continuously in Ti6Al4V metal during high-speed cutting. Additionally, the model incorporates friction and contact between the tool and the workpiece. It can be used to predict parameters such as cutting process, cutting force, temperature distribution, stress and strain in titanium alloy machining. The study establishes the model and implements corresponding functions by writing Abaqus VUMAT and VFRICTION subroutines. Findings The use of different material constitutive models can significantly impact the prediction of the cutting process. Some models may more accurately describe the mechanical behavior of the material, thus providing more reliable prediction results, while other models may exhibit larger deviations. Compared to the Tanh model, the proposed model achieves a maximum improvement of 8.9% in the prediction of cutting force and a maximum improvement of 20.9% in the prediction of chip morphology parameters. Compared to experiments, the proposed model achieves a minimum prediction error of 2.8% for average cutting force and a minimum error of 0.57% for sawtooth parameters. This study provides a comprehensive theoretical foundation and practical guidance for orthogonal cutting of titanium alloys. The model not only helps engineers and researchers better understand various phenomena in the cutting process but also serves as an important reference for optimizing cutting processes. Originality/value The originality of this research is guaranteed, as it has not been previously published in any journal or publication. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2024-0168/

Effect of cutting vibration on the surface quality of commercially pure titanium (TA2) based on rotor dynamics model analysis

Modeling of Metallic Surface Topography Modification by High-Frequency Vibration

Study of different cutting fluids effect on the coupling characteristics of milling noise-vibration and surface roughness of TA2 pure titanium

A thermo-mechanical fully coupled model for high-speed machining of Ti6Al4V

Analytical modelling and experimental study of surface roughness in ultrasonic elliptical vibration assisted ultra-precision cutting of Ti-6Al-4 V alloy

Influence of cutting velocity on surface roughness during the ultra-precision cutting of titanium alloys based on a comparison between simulation and experiment

Modeling and Simulation of Grinding Surface Topography Considering Wheel Vibration

Generation mechanism of the surface morphology on tilted ultrasonic elliptical vibration cutting TC4 titanium alloy

Performance of carbide tools with micro-texture on titanium alloys cutting in dry conditions

Effect of Ultrasonic Vibration Parameters on Machining Performance Based on Tool-Workpiece Contact Ratio

Physics-Based Predictive Cutting Force Model in Ultrasonic-Vibration-Assisted Grinding for Titanium Drilling

Research On The Effects Of Cutting Vibration On Surface Profile Generation

Modeling of cutting forces in 1-D and 2-D ultrasonic vibration-assisted milling of Ti-6Al-4V

Milling mechanism and surface roughness prediction model in ultrasonic vibration-assisted side milling of Ti–6Al–4 V

Research on Surface Roughness of Supersonic Vibration Auxiliary Side Milling for Titanium Alloy

Correction of the constitutive model and analysis of chip formation in cryogenic machining of TA15 titanium alloy

Energy Efficient Machining of Titanium Alloys by Controlling Cutting Temperature and Vibration

Influence of Vibration Inclination on Surface Quality and Tool Wear by Ultra-Precision Vibration-Assisted Cutting

A Simulation Study on the Effect of Micro-Textured Tools During Orthogonal Cutting of Titanium Alloy Ti-6Al-4V

A novel activated sticking-sliding friction model along tool-chip interface and mechanism analysis in high-speed machining of Ti6Al4V

Modeling and experimental study of surface generation in ultrasonic vibration-assisted grinding of Ti-6Al-4V micro-channels